😂

Et bien puisque vous attendez tous mes commentaires pour les scènes ETFG 544-564, les voici 😄
Les scènes fonctionnent pour moi. Merci @EverthangForever 👍
ETFG550 est assez surprenante avec ses moments d'obscurité 😊
ETFG 553 & 555 semblent celles qui me demande le plus de ressources et j'ai donc quelques mouvements saccadés. On peut remarquer que les scènes qui s'exécutent le moins bien sont celles où le changement de modèle (flèche vers la droite) met le plus de temps a s'effectuer.
ETFG 564 utilise un effet miroir dans certains shaders et effectivement, il arrive parfois que quelques traces de mouvements (principalement les pieds ou les mains) restent en incrustation un certain temps donnant un effet stroboscopique. Je ne sais pas si c'est voulu mais cela n'est pas très dérangeant😉
Donc encore merci et un excellent w-e à tous 😎

Well since you are all waiting for my comments for the ETFG 544-564 scenes, here they are 😄
Scenes work for me. Thank you @EverthangForever 👍
ETFG550 is quite surprising with its moments of darkness 😊
ETFG 553 & 555 seem to be the ones that require the most resources and I therefore have some jerky movements. We can notice that the scenes which run the least well are those where the change of model (arrow to the right) takes the longest time to take place.
ETFG 564 uses a mirror effect in some shaders and indeed, it sometimes happens that some traces of movements (mainly feet or hands) remain inlay for a while giving a stroboscopic effect. I don't know if it's intentional but it's not very disturbing 😉
So thank you again and a great weekend to all 😎

Thanks @EverthangForever.

I did a viewing of your scenes from FG502 scene to FG564 scene.

I have the 1080p, 3K and 4K cards enabled.

Here are the scenes that work less well for me, with more or less slight jerks in the movement of the girls. I often change girls with different resolutions while viewing a scene.

FG503
GPU 100
Render Latency 60-100 ms

FG505
GPU 100%
Render Latency 84-105 ms

FG528
GPU 100%
Render Latency 74-81ms

FG531
GPU 100%
Render Latency 110-157 ms

FG537
GPU 100%
Render Latency 98-102 ms

FG541
GPU 100%
Render Latency 70-100 ms

FG543
GPU 100%
Render Latency 70-100 ms

FG553
GPU 100%
Render Latency 97-108 ms

FG555
GPU 100%
Render Latency 84-110 ms

As for the FG564 scene, it works well for me. The only difference I see with the others, is that the pink circle, on which the girl is standing, comes out of the screen frame at its ends. I don't have the problem described by @Socialhazard, on this scene.

Thanks for everything.

Hopefully this information is helpful to you.


Merci @EverthangForever.

J'ai fait un visionnement de vos scènes à partir de la scàne FG502 jusqu'à la scène FG564.

J'ai les cartes 1080p, 3K et 4K activées.

Voici les scènes qui fonctionnent moins bien pour moi, avec des saccades plus ou moins légertes dans le mouvement des filles. Je change souvent de filles avec les différentes résolutions pendant le visionnement d'une scène.

FG503
GPU 100%
Render Latency 60%-100%

FG505
GPU 100%
Render Latency 84-105 ms

FG528
GPU 100%
Render Latency 74-81 ms

FG531
GPU 100%
Render Latency 110-157 ms

FG537
GPU 100%
Render Latency 98-102 ms

FG541
GPU 100%
Render Latency 70-100 ms

FG543
GPU 100%
Render Latency 70-100 ms

FG553
GPU 100%
Render Latency 97-108 ms

FG555
GPU 100%
Render Latency 84-110 ms

Pour ce qui est de la scène FG564, elle fonctionne bien pour moi. La seule différence que je vois avec les autres, est que le cercle rose, sur lequel se tient la fille, sort du cadre de l'écran à ses extrémités. Je n'ai pas le problème décrit par @Socialhazard, sur cette scène.

Merci pour tout.

En espérant que ces informations vous soient utiles.

@EverthangForever

All work great except FG564. It shows a duplicate of the clip behind the model and leaves after images with her movement with a few but not all of the backgrounds. Maybe just my rig though because I have had this problem before with older FG scenes after adding newer ones but fixed them by installing the older ones again. 😕

Здравствуйте! Испытываю подобную описанной выше проблему. Не могли бы вы скинуть и мои старые установки?

Thank God It's Friday, the last one of our Summer Sale 2022 !

Let's first check who delighted you this week :

• Clara Mia super voluptuous in her beige lingerie for 'Heat and Sand'
• Freya Mayer all in freshness with her 'Lovely Summer Dress'
• First release of Ana B !!!
• Super Sonya Blaze for one of the most famous cosplays we ever did !
• Karina King in a multicolors bikini for 'Poolside Capers'
• Calypso all in black with a whip for 'Shadow Play'
• First release of Milkavi !!

And on your mobile :

• Kelly Collins famous cosplay 'sail me to the moon'
• Nata Ocean and her vanilla cosplay
• Agatha Vega "Wild Heart"

And in VR 180 :

Freya Mayer take 3
https://www.istripper.com/fr/vr180/detail/6ac48153feaa6b21


SUMMER SALE – Week 5 : Slot Machine

What better way to end our Summer sale than with our famous Slot machine !


Here are its rules again :

The more your bet, the more you win.
Choose how many credits you want to bet (from 1 to 10 credits or "max bet for 10").
--> The discount range adjust at the top of the slot machine accordingly and applies to the cards drawn when you spin.

The discount ranges per bet:

• Bet 1 credit -> Get 15% to 55% discount
• Bet 2 credits -> Get 15% to 60% discount
• Bet 3 credits -> Get 20% to 65% discount
• Bet 4 credits -> Get 20% to 70% discount
• Bet 5 credits -> Get 25% to 75% discount
• Bet 6 credits -> Get 25% to 80% discount
• Bet 7 credits -> Get 30% to 85% discount
• Bet 8 credits -> Get 30% to 90% discount
• Bet 9 credits -> Get 35% to 95% discount
• Bet 10 credits -> Get 35% to 100% discount

If symbols appear on the line drawn, you also get:

• 1 symbol = your bet x 1 credit
• 2 symbols = your bet x 5 credits
• 3 symbols = your bet x 50 credits
• 4 symbols = your bet x 1 000 credits

And don't forget that Vanessa Alessia's Special Event Card is still waiting for you on your progression bar, if not reached yet !

😍👌

Yes!
I bought her card very shortly after 10:00 Paris time.
Milkavi is beautiful.
I took a look at her pics.
I love all that I see.

I posted two lovely pics of her at discord at about 10:06 Paris time.

I will be buying all of her cards.

What a great pleasure to announce the release of Milkavi's first show!!
This young Ukrainian beauty is a gem and the quality of her performances will instantly propel her to your Top10!

Enjoy!

Astonishing!!!!!!!!!!!!!!

🔥!

https://www.istripper.com/forum/thread/29408/74?post=747235
@Calgon , You may need to show your GLSL code a tad more to get better help
eg: are you using just 'texture' 'instead of 'texture2D' in da .fsh code syntax etc. ?

Hope these shader conversions have been useful to those experimenting with GLSL background effects. Kudos to @TheEmu & @Wyldanimal ,the @Team for the platform & initial shader works, & the members for their inspiring efforts over the years.

FG544-564 & almost through this backlog of catch ups now.
Twenty one more selected WebGL shaders converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform

FG555 to FG558, and 560, 561, & 564 use only standing clips
Standing or floor work randomly applies to all other scenes.

https://scenes.virtuastripper.net/ET_FractalGarden544-564.zip

zip size = 9.86 Mb .
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
As noted earlier, all scenes are best played with a playlist of 3K
(or lesser resolution) cards & clips, in order to ameliorate stutter.
https://www.istripper.com/forum/thread/27449/131?post=747236

Pshh, I always iStripper before breakfast. j/k 😂

Ana B is wonderful. 👍 😍

Well the couple of desktop clips I've just checked she's not hiding anything. 😘
And a very nice bonus video in todays outfit. You get nice and close to her in that.👍
I guess the photo set they just did not have time. No set can have every pose we all would like.
---
If there was a class of show between XXX and Full Nudity, this one would be a good example I think.
I mean no XXX content, but more touching of her pussy than you might see in many Full Nude shows.
But I've not been paying so much attention lately. That might be how they all are now.
Anyway I've not had my cornflakes yet. 😆

She's glorious, I can understand why the crew loved her!

I bought that card more than an hour (downloaded just fine).
I just looked at her bonus photos.

Ana has a beautiful ass I see in a few pics.
Bummer that Ana has not one close-up of her face and beautiful bare boobs.

Here is the first show from Ana B ! The Brazilian fever awaits you...
Ana B is a real Coup de Coeur for the studio crew, no doubt she will make your desktop shine!

i probably shuffled thru the manual 9 days ago.

Shuffling through the User Manual can be indeed exhausting and in specific if you are just here
to see the Girls Stripping.

From my own experience on my first encounter with the iStripper App, i just wanted to
see Candy Alexa getting Nude in her stunning Stockings. 😈 😊

I was indeed later paying attention to the User Manual, but i only grabbed those parts for me
which were looking really important.

If you want a recommendation from me then here are some:

Don't get stuck too long on the User Manual, but i'm not saying it wouldn't be helpful.

Explore the iStripper Client on your own because it's a really good Point and Click experience,
or maybe i should say what you click is what you get, more or less.

Take a closer look on this Section on the Forum, there are some really valuable information there.

https://www.istripper.com/forum/category/101/1

Even more important go to the Settings Page (Cogwheel in the upper right corner)
and activate "Advanced Settings" and leave them activated.

Pay Attention to all the Settings including their descriptions, to enjoy the full
experience of a single Show, because the default Settings are set to "Safe for Work".

This was what i was doing to learn more about the Software and all it's functions.

I hope this helps you and i hope you are staying in the Boat, otherwise you will miss
a nice ride on the Ocean of Lust and Desire. ❤️ 🔥

@Shapeshifter

It's a sick sad world out there, no doubt. Don't let it get to you. And I think the phrase you were looking for is "no good deed goes unpunished". Anyway, this place is for fun so welcome to the forum. 👍 😎

@Shapeshifter

My comment was not intended as a criticism of your post. It was intended to remind others that there is a lot of information about the program in its built in "help" pages.

You've never been that closed from Freya's breasts and the way she agitates them just in front of your eyes will instantly project you in the room where she performs... try to resist as long as she does :-P

https://www.istripper.com/vr180/detail/6ac48153feaa6b21

So TheEmu I don't know how sensitive you are but in one screen it says I am free to wonder but I was having a similar problem as others but obviously had read some of the user manual and found the pick up and place effect and was passing the info along but there is quite abit of reading in the different areas and couldn't quite remember where I picked up the info from. If I have been a member for 10 days and you kicking me out of the forum for being a free member just a day ago i probably shuffled thru the manual 9 days ago. So could you or a colleuge E-mail me and let me know if I "should stay or go now" As far as I know IStripper is a free site. And thanks for reminding me where I got the info from. The users manual of course didn't feel like deep diving yet. I hope this note is legal----I have the wierest dilema in the fact that whenever I try to help others the "evil that men do" comes a calling. My garage was falling over into the neigbors yard where there kids have swings and what-not so I was getting worried of finding out my lack of caring about the matter and created a change in ie. something like your perception of things changing anyways everything is back in place but the garage could have held out longer but I could have that so now I have to deal with contractors thru lawyers because they just couldn't stick to the script. I will spare you any more words but "the more things change the more they stay the same." Rush a trio from Canada I beieve So be well and over and out

The most important factor (for totem) is money. If this were something totem wanted to do, then it is about the money.

other factors might include:

Models have very few hours to do the shows, so if they already know the other model, then it is easier to get into the show.

Outfits and make up take time. If the model is dressed up with a fancy cosplay outfit and makeup, they need extra time for set up and clean up. This makes for a longer day. I am guessing that a swimsuit takes less time to prepare, but that is a guess on my part.

I'm sure there are other things that just add to the "problem" of the shows. The logistics of all of this might be something which makes the money a part of the problem, but not the only one.

my guesses...

Why does this no longer happen and has not happened for many years?

Sometime after it stopped happening @Rex (The Totem CEO) posted to say that duo cards did not sell well enough to justify the extra cost of producing them.

What can be done to make it happen again, if anything?

The customers as a whole enthusiastically buy any duo card that is produced so that they sell significantly better than solo cards and it becomes worthwhile for Totem to produce them. (I would not be one of them). That they did not previously do so speaks volumes,

In the rather distant past was DeskBabes (now set c, called IStripper Classic collection).
During much of this time (not all), four girls got together, where each girl did a solo and one duo with each of the other three.

Example 1
Niki Sweet, Lucy Bell, Iris, Gettin Cute

• Niki Sweet and Lucy Bell
• Niki Sweet and Iris
• Niki Sweet and Gettin Cute
• Lucy Bell and Iris
• Lucy Bell and Gettin Cute
• Iris and Gettin Cute

Example 2
Victoria Blaze, Leila Smith, Ferrara Gomez, Samantha Jolie

• Victoria Blaze and Leila Smith
• Victoria Blaze and Ferrara Gomez
• Victoria Blaze and Samantha Jolie
• Leila Smith and Ferrara Gomez
• Leila Smith and Samantha Jolie
• Ferrara Gomez and Samantha Jolie

By the way, I own all twenty cards of all these girls.
Lots of other girls were like this. I own all ten cards of each of twenty-four others like this. (lots of cards)

My questions:

How was this possible back then and not now or since the e and f cards began?
What made it possible for each girl to do a solo and three duos?
Why does this no longer happen and has not happened for many years?
What can be done to make it happen again, if anything?

easy fix just need that clue....

That "clue" is described in the app's built in tutorials and in the user manial - both of which are available via the "Help" button in the top right corner of the window.

Yep, here for the same reason and just to be able cruise this place; I b newbe and saw somewhere and actually acheived it myself (though can't repeat). You are abel to hmm can't use grab, pick-up; ok menuver them beaut's somehow "clicking, I suppose" they go off the ground and are then able to place them wherever you please, easy fix just need that clue....

@TheEmu - thanks, that's a shame that it's not possible to have the shader take coords from the bounding box.

Incidentally, I've been trying to convert this shader:

https://www.shadertoy.com/view/wljSWw

I have been able to convert it so that it runs but I ended up with the my ClipSprite as the texture of the walls and I've been unable to find a way to get it to use the proper textures. Is this something else that won't work on this platform ? Is there an example of a shader using a couple of textures that I could learn from ?

Regarding the "bounding box" that @EverthangForever refers to in his previous post.

By default this is the smallest rectangular area (with sides parallel to X and Y) that is large enough to contain the non-transparent areas of the current frame of the clip. it minimises the amount of work that has to be done to render the frame. It changes size and position as the model moves. In the scene file you can use a Border: clause within a Clip to increase this by a fixed amount in all directions, e.g.

clip {
border: 60
id: MyClip
allow: pole
}

This is normally used to enable a shader to render into a larger area than the bounding box - e.g. to allow a blur to blur into the immediately surrounding area. Note, however, that this does not stop it changing size as the model moves.

Also note that the pixel coordinates seen by the shader are always relative to the full screen-sized clip's origin - they are not relative to the bounding box. This means that if you use a shader to add a background to a clip it does not move with the model, What you will see is a moving window into a larger unmoving image.

You can see this in my Naughty Fairies scenes where the Fairy Magic sparkles do not move with the fairies (and indeed get truncated by the edges of their bounding boxes) though I try my best to disguise this.

As for running sprites within the clipspite node, you can only run 'pure' shaders
within the model bounding box in clipsprite node under da shader: parameter.
I mean 'pure' as in ..shaders having their own integrated graphics only, not any externally
rendered textures, as you might want in a slideshow of an open directory full of graphics.

👍 😍

Amazing model, thanks to the Team for making us discover all these beautiful girls. 😍👍

Ana B - Pastel Parade - e1776 - iStripper
Sonya Blaze - Super Sonya - f1113 - iStripper XXX
Freya Mayer - Lovely Summer Dress - f1116 - iStripper XXX
Calypso - Shadow Play - e1767 - iStripper
Clara Mia - Heat and Sand - f1107 - iStripper XXX
Karina King - Poolside Capers - f1123 - iStripper XXX
Milkavi - Summer Blues - e1777 - iStripper

No problemo,
just apply a shader to one clipsprite node
and then another clipsprite node below it for the model
to be surrounded by her bounding box , if you like
a la..

camera {
type: 3D
angle: 43
pos: 0, 0, 1880

clipSprite {
pos: 0, 320, 600
source: Clip
sittingHeight: 640
resolution: 20
shader: fragment, Shaders/Tileable Water Caustic.fsh
}
clipSprite {
pos: 0, 320, 600
source: Clip
sittingHeight: 640
resolution: 20
scale: -1, 1, 1
opacity: 1.0
}

With respect to @TheEmu 's answer to your earlier slide show question..
You do not need shaders with heaps of buffers..& texture2D channels like
iChannel0, iChannel1, iChannel2,and iChannel3,
( the three latter of whch seem unavailable on our OpenGL iStripper platform ) , instead
You can play with the .scn code for animation of backgrounds like in FG066 & earlier
https://scenes.virtuastripper.net/ET_FractalGarden66.zip
Just change the 15 animation background frames to other jpg or png's of much longer duration.

Hi @EverthangForver , thanks for the reply. It's been interesting tinkering around with them. I saw in a QA scene by @WyldAnimal that he is able to identify the models screen position to draw a rectangle around the model clip. I wanted to replace this with an image so that the image follows the models position in the same way that the rectangle does. Is this possible ?

Code from @WyldAnimal scene:

clipSprite { //WA: BBox
pos: 0, 480, 1
standingHeight: 750
sittingHeight: 750
source: ClipAntiAlias
scale: -1.0, 1.0, 1.0
uniform: ClipAlpha, float, 1.0 // opacity of Clip image
uniform: BboxColor, vec3, 1.0, 1.0, 0.0 // color of the BBox
uniform: ModColor, vec3, 1.0, 0.0, 1.0 // color of the Model
uniform: BboxAlpha, float, 1.0 // opacity of BBox
shader: fragment, Shaders/BBox2.fsh //WA: BBox effect
}


Extract from the shader:

/////////////////////////////////////////////////////////////////////////////////
// Modifications by WyldAnimal


uniform vec3 ModColor;
#ifndef ModColor
#define Mod_Color ModColor
#endif
uniform float ClipAlpha;
#ifndef ClipAlpha
#define Clip_Alpha ClipAlpha
#endif
uniform vec3 BboxColor;
#ifndef BboxColor
#define Bbox_Color BboxColor
#endif
uniform float BboxAlpha;
#ifndef BboxAlpha
#define Bbox_Alpha BboxAlpha
#endif

Hi @Calgon, great question..
As far as I know, we cannot do a lot of things on our OpenGL
platform that the WebGL (Shadertoy) platform does

• We are limited to using one mounting texture to render a shader onto
• We cannot process Cube textures
• We cannot display anything that differs from a final simple gl_Fragcolor entry
• So far I have not been able to use framebuffers to simultaneously run

the same shader over different textures using texture2D syntax

• additional to all this, if it was possible to run the extra channels needed..the amount

of processing required on our OpenGL platform would cause so much lag and stuttering
of model movement as to render it unusable.

@TheEmu may be able to demonstrate examples which show otherwise.

The problem seems to be that a shader's render screen position gets fixed
from the get go, so unlike a sprite that you can move or make transparent
by animation clauses in the scene (.scn) coding, any rendering that the
shader does is limited to the gl_FragCoord position & iTime fixed settings
initially set up.

@TheEmu thanks, that will be interesting to play around with.

I'd still like to know how to convert shaders that use the extra buffers - do you know any examples that have been done ?

@Calgon

You do not need to use any shaders to create a slideshow, you can do it by modulating the opacities of any number of Sprites each having a separate texture as its source. For examples of this see

https://www.theemusnest.eu/scenes/Zips/TheEmusTardisConservatory.zip

By varying the speed of the transitions you can have either rapid flicks between the images or can simulate cross fading between them and can even use the technique to provide the equivalent of simple gif animations.

You can also animate the positions of a stack of Sprites to produce sliding transitions.

Or you can animate the sizes of a set of sprites.

And yu can combine these effects in any way that you want - e.g. a spinning, expanding fade.

If you use a 3D camera you can make an image "tumble" into or out of view.

Hi @EverthangForever
I've been dabbling with some shader conversions. I wondered if you'd seen this one:
https://www.shadertoy.com/view/wdtGW7

The writer has built comments around the code to make it b** awkward to follow what they have done but it uses all 4 available buffers with 4 textures in each - so allowing a slideshow of 16 different backgrounds.

I wondered if you could convert it to iStripper or give some pointers on how to call in the textures and the 4 buffers and common tabs. I've only been able to work with the simpler shaders so far that only use the image tab.

This girl is AMAZING!

I love our South-American models 😍 Alika is a great addition to our roster!!

I absolutely second this!

Have been looking forward to the amazing looking Alika, and so far it has not disappointed one bit.
I did watch a couple of her VR scenes (**********************). After that I've been looking forward to her shows even more. Love her pretty face and sexy ass (which is properly oiled up in this first show)! 🔥🔥🔥🤤

Edit by Mod: the rules of the Forum are that you are not allowed to mention any other name than that by which the model chooses to be known on iStripper.

I love our South-American models 😍 Alika is a great addition to our roster!!

I just bought this card. I forgot that today is Friday and three cards are available. I already bought one other.

Thank God It's Friday and our summer sale continues….

Let's start with the shows we have released this week :

• My favorite lingerie worn by Calypso in "Sizzling Hot Babe" 
• Karina King / Dazzling In Diamante
• Geishakyd so cute with her little blue satin underwears for "Coo Coo Ca Choo"
• Our cuty Georgia and her eyes as bleu as her denim shorts for Pink "Shortcake"
• Burgundy lace bodysuit is the choice of Moona Snake this week for "Ragazza Sensuale"
• Ahhh here is Josephine Jackson and her increible white & red apron for "Bake Off, Take Off"
• FIRST RELEASE of Alika, a pure jewel

And on your mobile :

• Lana Lane in a lovely super tiny student skirt & transparent top
• Les Diaboliques Clara Mia & Clemence Audiard !
• Melody Marks wearing a Horny Foxy Maid outfit

And in VR 180 :

Christy white & Eve Sweet playing in the hay :
https://www.istripper.com/fr/vr180/detail/5ed53f06fdaac093


SUMMER SALE – Week 4 : Rainbow Candy

Rain of credits and Special Event cards this week again !

Here are the rules of the Rainbow Candy :

Scratch the 5 candy bears circles PLUS scratch the big round box.
If one of the bear boxes displays the same prize as the big box: you win the prize!

You can win : 15, 35, 150 credits, a free card or a special event card.


And don't forget that Vanessa Alessia's Special Event Card is still waiting for you on your progression bar, if not reached yet !

Please welcome Alika's first show "Hot In The Jungle" and her columbian origins makes her indeed very hot !



Enjoy !

This show is going to be amazing and extra hot! 🔥💕💖😍

https://www.istripper.com/forum/thread/29408/74?post=746988

FG523-543 shader catch ups to FG543 for sharing..
Twenty one selected WebGL shaders converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.

FG524 uses only table clips
FG526 - 538, & 543 use only standing clips however you can remove 'table'
from their scn deny parameters and the table clips will return auto sized.
Standing or floor work randomly applies to any other scenes.

https://scenes.virtuastripper.net/ET_FractalGarden523-543.zip

zip size = 1.46 MB .
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
As noted earlier, all scenes are best played with a playlist of 3K
(or lesser resolution) cards & clips, in order to ameliorate stutter.
https://www.istripper.com/forum/thread/27449/131?post=746989

Izzy
alejandra jane
viola & lola reve (lola has the mask)


also have mask shows