I have over 300 songs in my playlist - most of them are late 60's early 70's Blues/Psychedelic/Rock/Pop which work well with a lot of the shows and full screen scenes. I also have some Soul (Staxx Atlantic) and Tamla Motown, songs from the same era, which also work well with many of the shows.
I also have a few "querky" songs in the play list.
This one works well from a music point of view but mostly I just love the absolute irony of the lyrics,
www.youtube.com/watch?v=0eq3ATiDN_Y s

Strange but true - I also find that this one works well with a lot of shows
www.youtube.com/watch?v=cqbqQjIxhwU s

There is also a Reggae version
www.youtube.com/watch?v=j7lP0PTLZPI s

Best of all is this one
www.youtube.com/watch?v=lUNWtrY2hi4 s
Probably too low a tempo for the shows but I would love to see the solo violinist on VG she is gorgeous:-)

An up tempo version of one of my favourite John lennon songs which also seems to work well with a lot shows.
www.youtube.com/watch?v=LrwsUur6SfE s

One of my favourite covers of Jimi Hendrix's Little Wing - the saxophonist gives Eric Clapton a run for his money
www.youtube.com/watch?v=53DBk4wufLc s

There is also this one. Not only did the BBC ban it from being played but they also refused to name the title when they did the rundown of the Top 20 at the time.
www.youtube.com/watch?v=C79spWeuakU s

I also had look at the Laura Cox video of the Free Song - Alrlght Now which is one of my all time favourite songs. Any arsehole who cannot tell the difference between "Wrong" and "Different" or "tuning a guitar" and deliberately mis-tuning it to create an effect, should not be allowed to comment on anything. What is the point of covering a song if you are going to do it in exactly the same style as the original - you need to put your own stamp on it. She does. I would prefer not to comment on how beautiful she is, as it is irreleveant in the context of the music, however I would love to see her on VG :-)

If you don't mind cover versions, don't care about interpretations and would just like to chill out for a few minutes try this one.
www.youtube.com/watch?v=niZqfZQmGgg s

Same red dress stringed in left hip
Kitty Jane & Billie Star & Kyra Hot
Kitty Jane in her VG solo card (Backgammon - Nr.a0789)
Billie in her VG solo card (Rumba - Nr.a1596)
Kyra in her new VG solo card (Alight - Nr.e0100)

Remarks:
All of them wearing some jewelry:

• Kitty Jane wearing gold earrings and a gold bracelat in her right wrist
• Billie wearing red earrings and a small navel piercing
• Kyra wearing a gold 'SEX' necklace; a gold bracelat in her right wrist; rings on her fingers and a small navel piercing

Others:

• All of them wearing same red string thong
• Kitty Jane and Kyra wearing red high heels (not same); Bille wearing black high heels
• Bilie wearing a hair-slide with red plastic flower; Kitty Jane and Kyra not wearing

Another remark:
Same dress previously wore in Deskbabes Melisa (in her DB duo card with Celina) and Tifany (in her DB solo card) - see in the 3rd picture.

I've learned not to argue with you. I have my own opinions. I will keep them to myself.

Good day to you, sir.

"This is great sport. I can feel you breathing down my neck now."

Not the first time you've posted something along those lines.

Is this a game to you Weabul ? Poking at the Moderators to get our attention ? The kind of attention you may not want ?

There's not much latitude left.

Just sayin'



"And if ancient threads are trouble for the moderators to monitor effectively, why are they not closed?"

Bringing life to an old thread isn't really a problem. The potential difference in the posting rules could be an issue if someone doesn't bother to follow the current rules. We're quite effective at monitoring current posts, no matter how old the thread is or how long it's been since the last post in that thread. Letting a member know they've broken a rule isn't necessarily us "Jumping" on them. It's usually more of a "Hey, by the way" kinda thing. Unless they continue to ignore the rules.

Some threads, especially the old "Pic Dumping Threads" had a completely different set of rules way back when. Had Copyright Material bursting out at the seams. It lead to Totem being contacted and put on the spot. Which is exactly why we currently have Copyright Material prohibited in all categories except the "Nude Girls" category. Only a hand full of other sites agreed to allow that.


One more thing before I go.......
Be as paranoid as you want but, don't try to instill ***** into the minds of other members. That point of conversation needs to stop right now.

I'm not quite catching your drift, Wyld. I walk on eggshells here in the forums, as the moderators have corrected me many times. The rules are often interpreted differently by the moderators than by new users. I thought I was providing some semblance of assistance to all of you, yet one moderator in particular is holding my embilical cord in one hand, and the scissors in the other. I understand that the moderators work as a team, but when 2 or more of you are gathered - the hairs stand up on the back of my neck, and I choose my words ever so carefully so as to convey my thoughts clearly.

There is no secret, other than that which you and I share from a previous PM.

I am vigilant of my on-line safety, as I have been 'taken in' in the past, and there are stories of horendous consequences if one's personal identity is stolen online. I merely wish to caution other users of this potential outside threat, in my posts. You refer of course to the map thing, and my caution to users about GPS locating, in 'About You / About Me, I presume? or perhaps my reference to posting personal real pictures in your avatar?

There is no taboo. Just potential threat from crazy people and scammers. You folks do a fine job of identifying some shady people on your site. Some play very long, convoluted schemes, and escape early scrutiny. Can't be too careful with your life.

Seems to me that the rules, the etiquette, and the history of the forums are the deep, dark secrets, and I'm not allowed to share my knowledge of same in public. No external documentation, no history of banned participants, posts hidden and removed without explanation (and no log of same), and many features neither documented nor revealed until a user has been active for a good while. I have no secrets. But I value my privacy.

@Theemu good thats clear,
well it suits me fine in Ice Caves.fsh because I can narrow down the tweek spots to a few areas of shader code and allow people to change the whole morphology of their caves and even rate of travel via the SCN's uniform settings. so its been worthwhile. thanks Great !

@EverthangForever

Yes, I think you have the right idea. A lot of the shaders from ShaderToy and elsewhere simply hard code constants in the middle of the code and in the past if you wanted versions that just used different values for one or more of these constants you had to have differently named shader files.

In some shaders the rather better style of defining the constants as a block of const declarations or #define statements near the start of the file was used. With this style you have (hopefully) meaningful names for the constants and can see how they are related, rather than having to guess what they represent, and they are all gathered together in one place. This style makes tweaking their values somewhat easier, but still means that you need different shader files for each set of values.

By making the control parameters inputs to the shaders, using uniforms, rather than part of the shaders you can use a single more general shader instead of a whole set of specialised ones. It is no different in principle from using a subroutine for the function sin(x) rather than a set of individual constants like sin_0, sin_30, sin_45, etc.

Thank you, @Theemu, several of us have been tweeking around existing values (eg: Icecave.fsh) even within the shader code (void) and then renaming shaders to suit the SCN, and I understand now use of uniforms allows shaders to be commonly and progressively used with only the shaders preamble code being needed to be tweeked or added to,however, it still looks like we will still have to have a new shader name for every instance where we change the code terms below the preamble in order for old scenes to be backwardly compatible.

as an observer,
you write as if your Participation here is a dark, taboo.
something that you want to keep hidden and secrete..

I find that interesting.
the Forums are thought of as a Dirty Little Secrete

The comment about "need to return something" has nothing directly to do with the use of uniforms. Its just that any function needs to return a value (unless its return type is void) so I cover the possibility of an invalid value for an argument to the function by returning 0.0. If the function is being used properly then this particular return statement will never get executed, but it is there "just in case" to prevent undefined behaviour. In a "better" language I would log an error or raise an exception, but those are not options in the shader languages.

From my experiences so far a shader can declare uniforms which do not appear in any .scn file and they seem to get initialised to all zeros. However, if a scene file declares a uniform in a node and that does not correspond to any in the shader referenced in the same node then an error is reported.

I'm curious about one shader being used to serve many different scene files.

In the TheEmu - Move A.vsh (screencap above) code comment says
// 'invalid type, but we need to return something'
return 0.0;

Does this mean that the VGPlayer debug would show an error otherwise when uniform definitions required by individual SCN files are not applicable to ALL the uniforms declared in the shader being used ?

Or does one shader like 'TheEmu - Move A.vsh' simply provide uniform declarations to accomodate all SCNs that MAY use it, without showing a VGPlayer debug error, for those definitions not used.

Discussions for Scenes for Version 1.2.X Fullscreen Mode here
http://www.virtuagirl.com/forumPost.php?foId=3&ftId=27449&gotolastpage=19 http://www.virtuagirl.com/forumPost.php?&foId=8&ftId=27410&pageNb=3
Share your FullScreen - Member Created Scenes here
www.virtuagirl.com/forumPost.php?foId=3&ftId=29408&gotolastpage=3 http://www.virtuagirl.com/forumPost.php?foId=3&ftId=29408&gotolastpage=3
Full Screen Mode - Examples - Tutorials - Scene samples
www.virtuagirl.com/forumPost.php?&foId=8&ftId=27410&pageNb=3 http://www.virtuagirl.com/forumPost.php?&foId=8&ftId=27410&pageNb=3

@WyldAnimal

As well as new keywords such as "uniform" the notepad++ language file has an incomplete list of Qt easing curves. It is missing

inCurve outCurve
sineCurve cosineCurve
BezierSpline TCBSpline
custom

I don't know if the software knows about the other curve types but it certainly supports at least sineCurve and cosineCurve because I have used them, and they at least ought to be included in the language file.

@WyldAnimal

As well as new keywords such as "uniform" the notepad++ language file has an incomplete list of Qt easing curves. It is missing

inCurve outCurve
sineCurve cosineCurve
BezierSpline TCBSpline
custom

I don't know if the software knows about the other curve types but it certainly supports at least sineCurve and cosineCurve because I have used them, and they at least ought to be included in the language file.

This is great sport. I can feel you breathing down my neck now. I'm not arguing, just observing what actually happens when new users post messages in the forums. I'm speaking from experience as a new user, and trying to find a way to help others avoid those pitfalls I have encountered in my learning curve.

The fine print isn't obvious to a new user as a hot key. And where did nudity come into your thoughts? I didn't bring it up, and I wasn't talking about nudity at all.

Having one's post deleted can be personally embarassing, particularly when it's your first post, and may cause annoyance in and of itself. I have noticed that new users often ignore all of the red flags and enter a new post, sometimes right next to one that is nearly identical. Inexperience maybe. If they COULDN'T enter a post into the forums before reading the TOS/EULA, this might relieve some stress on the moderators.

My first post wasn't placed in the forums in haste. I did some research - a week's worth of research - and I still got it wrong, and was embarrassed when it was pointed out to me that I had transgressed.

Did I mention anywhere in this thread that I was dedicated to finding a better way? Did I mention that I noticed plenty 'o frustration throughout the forums and that I wanted only to find a way to relieve the pressure on all party's concerned? Did I reveal any information that I promised to keep confidential?

I am merely relating items that have frustrated me, and I can't find a way without help to correct them. There is a better way. I aim to find one, and I could use all the help I can get. Are you with me, or not?

Furthermore, if a user posts a personal picture here in VirtuaGirl, and also has that same picture on another site, FaceBook perhaps, then any number of nefarious individuals may be able to make a coorelation and use that information against the user. I was not referring to anything else.

People often don't read what's placed in front of them. I mentioned in another thread recently that a recent university study had several individuals signing over their first born by using software freshly downloaded without reading the TOS/EULA first. It's obviously not working well the way it is.

If my opinions are not welcome here, then be straight with me and tell me plainly. I find your insinuations disturbing.

And if ancient threads are trouble for the moderators to monitor effectively, why are they not closed?

Well, I guess we don't celebrate this every year. International Women's Day http://en.wikipedia.org/wiki/International_Women%27s_Day - March 8th
I'll be back then.

Weabul http://www.virtuagirl.com/userProfile.php?usLogin=v14619757 - 2 hour(s) ago
Ditto, about posting "real you" pictures as your profile image. This can be trouble, too. New users are blythly unaware, and subject themselves to many hazards by doing so blindly.

Members can use their REAL picture for the avatar if they are comfortable doing so..
But they can't use a picture that shows Nudity or is explicit.

and they are not blythly unaware..
Right there where you add the Avatar, it clearly states, No Nudity
along with the Terems...


What a member Can't do, is to Post an Avatar Picture of someone else, and Claim that it is really them..
That is impersonation and it's against the Terms and Conditions.

Want to use a picture of your favorite model, actor, actress, porn star....
no Problem... you can do that....
just don't go telling everyone, that it's really you...

"Access to the forums, or posting in the forums, ought to have prerequisite study topics." ???

Actually, posting in the forum Does have prerequisite study topics.

Each time you post in the forum, you have the rules right there in your face below the Add New Post button and you agree to abide by those rules just by posting.

The very last sentence......... terms and conditions http://www.virtuagirl.com/termsAndConditions.php is a link to the more detailed T.O.S.

They are there for you to study. Alot of people seem to have no clue that there are rules listed below the box you type in. Or don't care to know. Some people even want to argue and say they're hard to find.

EDIT by MOD:
URL removed.
Plese Don't Post Off topic in the Team threads. http://www.virtuagirl.com/forumPost.php?foId=6&ftId=29915&gotolastpage=1#post466642

EDIT by MOD:
URL removed.
Plese Don't Post Off topic in the Team threads. http://www.virtuagirl.com/forumPost.php?foId=6&ftId=29915&gotolastpage=1#post466642

If you see this message after posting a question or comment (and later returning for an answer), then you didn't take the time to read the rules. It happens plenty 'o times for new-users, because the rules are difficult to find. In my humble opinion, they ought to jump into the new-user's face before the site home page is displayed, immediately following a screening of the rules of etiquette, and how to avoid discomfort and shame.

Access to the forums, or posting in the forums, ought to have prerequisite study topics.

Ditto, about posting "real you" pictures as your profile image. This can be trouble, too. New users are blythly unaware, and subject themselves to many hazards by doing so blindly.

Converted the IQ Fish FG017 ( SCN only ) to 2D Camera settings, & less the antialias shaders etc for @No.6 @Hombre & others. IceCave hybrid was already using 2D camera, so should be ok.

http://scenes.virtuastripper.net/ETFractalGarden017_2DSCN.zip http://scenes.virtuastripper.net/ETFractalGarden017_2DSCN.zip

@No.6 thanks added uniform: ok to Notepad++ ~language/VGscene settings. I believe filter: was made redundent by Totem in favor of deny: quite some time ago, in one of the VGPlayer updates :)

hooooo yessssss kyra hot takes the top spot THICK GIRL GET IT GOING ON AND KNOW HOW TO WORK IT TOO.!!!!!!!! i rate her a 10.😎

Camila Chix

Some news for coming cards? ore will this topic be an future wasteland?!?

@Wyldanimal

Whilst you are updating Notepad++, I think filter: was also missing from the list of Group 1 keywords.

I'm not sure if anyone actually uses this but it was in the original Totem Penthouse club multi scene.

I think you had got scale: in Group 1 twice and I overwrote one of them with filter: which fixed it for me. Its been a long while so I am not absolutely sure - you may even have amended it in the meantime.

@EverthangForever

If you want to add uniform: to @Wyldanimal's VG Scene language in Notepad ++, it is fairly easy to do.

Open Notepad++ and click on the Language menu. Select "Define your language..." and a Pop Up Window will open.

Select "VG Scene" from the "User Language" drop down menu then select the "Keywords Lists" tab.

In the "1st group" you will see all the current parameter words (id:, deny:, etc) just add "uniform:" (without the quotes) at the end of the group. Close the Pop Up window (no need to save unless you want to give it a new name).

PS - Don't ***** about the Fish - I've got lots to be playing with at the moment.:-)

ah, now I get why VGplayer's debug was throwing 'swizzle' errors in the early days of non-compiles..thank you 😄

@Number6...'Unfortunately the full screen fish is beyond my new graphics card but the smaller one works fine. '

[email protected] thats my fault. After playing with the scene, I persist in leaving the Camera setting as 3D instead of converting it all back to 2D Camera and sprite positions. I'll have to not be such a Lazyass...I'll resize & reposition the sprites and shader quads & rewrite them all again when I get a round Tuit 😂

And a new Kyra Hot card.

EverthangForever http://www.virtuagirl.com/userProfile.php?usLogin=v8224782 - 39 min ago
Noted that: In Notepad++ 'uniform' is not assigned a blue font yet, as are other parameter qualities.

That is Because when I wrote the Notepad++ .scn language file
uniform: wasn't yet part of the .scn language.

I'll have to update the Notepad++ language file to include it..

there is a slight bug in the Windows shaders.
they will allow a non decimal Integer to be used with a float.
But on the Mac, it will cause an error..

So Unless you have defined the variable to be an integer,
Always make sure to have a decimal point. the Leading or Trailing 0 is not required.
but I use it as a habit. 5.0 is the same as 5. but 5 is not.

float = single component Floating point value. 5.0 or 5.
vec2 = a 2 component floating point value 5.1, 3.4 - Two Components
vec3 = a 3 component floating point value 1.2, 5.7, 0.3 - Three Components
vec4 = a 4 component floating point value .2, -2.3, -11., 7. - Four Components

int = a single integer without a decimal point, just 3 not 3. or just -5 not -5.

if you create a variable WyldsZoom and define it as a vec4
then it Must have 4 components to it..

uniform: WyldsZoom, vec4, .2, 3.4, 7. ,.5

in the shader you can then use the swizzle
xyzw or rgba or stpq

so WyldsZoom.z is the Third value of the vec4 = 7.

vec2 MyVariable = WyldsZoom.yx is a way to take the Third and Second components from WyldsZoom and assign them as the Two Components of MyVariable

So now MyVariable = 3.4, .2

x is always component 1
y is always component 2
z is always component 3
w is always component 4

vec3 MyNewVariable = ( 1.2, 3.4, 5.6 )

MyNewVariable.w is an error because MyNewVraible is only a vec3 and does not have a w, there is no 4th component to it.

@Wyld ..thank you for that 😊

So I take it that in 'uniforms' members should always write values (or list of values) as having a decimal point
eg: 0.5 not .5
and throughout shader code generally, if you are directly tweeking any alterations of shader values, same, however only use an integer say like 0 or 1 or 10 etc. after seeing the expression 'int' used.
~from @TheEmu's
TheEmu = Experiments with Clouds - A3 - Cloud Bank - Good - Knee deep.scn

• the above is a screen cap of 'uniform' typically seen in how it may be expressed in a SCN code
  
• in blue is how it is expressed in the shader code.
  

Full descriptions are commented by @TheEmu in his code tweeks.

Noted that: In Notepad++ 'uniform' is not assigned a blue font yet, as are other parameter qualities.

Happy Women's Day! http://www.virtuagirl.com/forumPost.php?foId=3&ftId=12366

well before the new virtuagirl came out...i guess when i first used your program...i dont have a lot of hard drive space but maybe why...when i first used your program it took around 5 seconds to load

Can anyone please explain to me, why the db cards are of inferior quality compared to vg? Clearly, the 3k cards are not 3k, they are 1080p at most. Sorry, can't name cards at the moment, I'm on my phone. Also, the sound quality on almost all of them is *****, I don't know if this is necessary to keep the size down or something, but in most cases it sounds like you're using a 5 dollar mic. Even my headset mic has higher quality recording.

An official response would be appreciated, because if these issues are not rectified in the near future, I don't think it is worth it to purchase db cards.

Thank you.

@Lloydn: What older version are we talking about? Older than 2.9 like 2.8 or older? My Program does read the xml files for every show on startup. I do this already with 2 threads simultaniously to speed the process up.
But if you have your data and model folder on an external drive that also isn't fast or you haven't excluded the VG Data folder from your antivirus real time checks it might take some time with big collections to read all xml files.
But the reading of the xmls is part of the program since version 2.7 so we are talking about something already present for about 6 months.

guys i have small problem...when i click on the program it takes forever to load...like 1-2 minutes too...with the older version it never did...i never changed my computer or nothin...any reason for it?...

thanks
Lloyd
p.s. great program

New Aurelly card.

Update Build 2015-03-04-19:00 CET

Fixed one problem with the Clipinfo in Paused Playlist Mode if VG played a demo or a show downloaded after starting PLM.
Then an errormessage would come up
Also i assured that the cliptimer only comes up for shows that are in your collection and downloaded as its way off otherwise.

Just redownload the jar file with the links given above to get these fixes.

Here are more white sexy panties from Camila Chix.

The Use of Uniform:

In a shader it meant the Value for that Varible has already been defined.
the shader will use the value already given to that variable.

It is a way to Share variable, across the entire GLSL project.

Example: in the .SCN create a new Variable, give it a Value, and then it is Shared in the Fragment Shader to be used by one of the Math routines.


In the SCN file
This is where you Define or Create your Variable and Assign it a Type, and it's Value(s).

uniform: name, type, value(s)

uniform: WyldsZoom, float, 0.5

Here I created a new Variable and gave it the Name WyldsZoom
I defined it as a float
and gave it the value of 0.5

This new variable and value get stored in Memory.

In the Fragment Shader I would add this

uniform: WyldsZoom

That Says, Get the Variable named WyldsZoom stored in Memory

Now I can use my Variable in a math function.

instead of
x=x*0.5
y=y*0.5
where it is fixed...

I can use
x=x*WyldsZoom
y=y*WyldsZoom

and back in my .SCn file I can adjust the Value of my Variable, with out having to Edit the shader.

@Virt4B

I fully agree! ;-)

On the subject of 'Uniforms' in shader code, mentioned in a recent Tutorial stream post by @Theemu, I'm still not clear on the correct syntax for declaring Uniforms in scene files and how to declare them in their corresponding shader code lines.. still looking for examples of this.

In the latest shadertoy scenes we've received Eg:
[2TC 15] - Pheeelicks - 1 Tweet Sun.fsh
all I can find is no uniform declared in its SCN and only
'uniform sampler2D iChannel0;'
being declared in the shader code.

I know that if nothing about uniforms is declared in the SCN file
by default the shader's uniform sampler2D being = iChannel0, then
iChannel0 will be assumed by the shader to be the last listed sprite in the SCN file ie: usually a clipnamesprite (model name image).Shouldn't there be a defining statement in the SCN file though about this?
Maybe explains why my Icecave experiment FG018 with 2 textures threw an error and the thing kept playing with the last listed sprite assumed to be the uniform.

Is that correct ?? (sorry about repeating the plead-cat..directed mainly to shader boffins Emu/Wyld/lezardo/others ?)

Edit: Excellent..@Theemu supplied answer in Tutorial thread ..Thank you maestro 😄
http://www.virtuagirl.com/forumPost.php?foId=8&ftId=27410&gotolastpage=1#bottom

The second series of "Experiments" that I uploaded today are a quite simple series of scenes based on using a large collection of flag images. There are scenes where the flags are used ase static or moving backdrops and scenes where they are used as screens through which you can see the performances - the example above is abnormal, most of the holes are much smaller and closer together and you can see all of the girl.

Other than the flags some of these scenes use a couple of shaders. One of the shaders is my own variation of the move2.vsh vertex shader which I have made a bit more flexible and controllable from the .scn file.

A second shader is one that can be used to punch holes in an image to create a screen though which performances can be seen. Again it is quite flexible allowing the spacing, arrangement, size, shape and orientation of the holes to be controlled from the .scn file.

I have thrown in a few scenes where the performers are only seen in silhouette before or behind a flag.

They can be obtained from via the Zips download page at TheEmusNest.eu or via the direct link

http://www.theemusnest.eu/scenes/Zips/Experiments/Flags.zip

--------------------------------------------------------------

Although I posted this a couple of days ago its still the article in this thread so I can still edit it.

I had made a silly spelling error in the perforations shader and the scene files that use it, so I have corrected it and at the same time slightly increased the flexibility of the shader. The updated version has just been uploaded. If you did take the previous version please note that the new version of the shader is incompatible with the old scene files due to changes in the definition of the "uniform" variables used to communicate between them.

I have added two "experiments" series to my website. The first, illustrated above, uses shaders to generate billowing clouds, smoke or fog.

You can get them via the Zips link on the downloads page at TheEmusNest.eu or using the direct link

http://www.theemusnest.eu/scenes/Zips/Experiments/Clouds.zip

The outfits definitely belong to the girls - I noticed te same when I saw Paula Shy's female agent video.
She brings a bag of stuff that the "agent" helps her sort through, and she has her yellow shorts among other things.

A personal tribute to all who have helped me to fly straight in the forums:

A Momentary Lapse of Reason -Pink Floyd
Learning to Fly http://www.veoh.com/watch/v304612ajbExB7s?h1=Pink+Floyd+-+Learning+To+Fly

Hombre - you should see some of the comments in my news feed..I don't even go there anymore. If only more people were more well-read, the e-world might be a better place today.

“Live your truth. Express your love. Share your enthusiasm. Take action towards your dreams. Walk your talk. Dance and sing to your music. Embrace your blessings. Make today worth remembering.”
― Steve Maraboli

I just found this topic... Been concentrating on other issues recently, and there is sooooo much about music in the forums, it is daunting to find related content...

This is a great idea - I am posting a link here so I can follow later and keep up to the wise ones:
Forum http://www.virtuagirl.com/forum.php > Ideas http://www.virtuagirl.com/forumTopic.php?foId=8 > Select Music for each Girl http://www.virtuagirl.com/forumPost.php?foId=8&ftId=27785

@zzmaskers: You're right. Shes hot and talented. (Laura Cox). I couldn't believe all of the 'Talented' expert comments slagging off her style. I haven't even bothered to check out if any if those, 'EXPERTS?' had produced anything.

IMHO, If you recognise talent then you should say so and share it with others. There are too many assholes on you tube. 'Trolls'. I have been informed is the correct definition for these talentless idiots.
Thanks for sharing that one buddy! :)

Ok here we go

VG PlaylistManager V 2.9.4

New Features

• new Playmode model_slideshow
  
• Clipinfo refreshes automatically also when Playlist is paused
  

Fixes

• Bugfix for Exception when Toolbox ShowInfo Dialog was used and the the last entry in the list was selected. If then another clip from a show that was already in the list would be played this would cause an exception (found by JeB1952) Reason was that i always expected to add a new item to the list but that only the case for the clip view but not for model or show view
  
• Bugfix for Exception when the Option 'only build playlist...' was used together with the option 'save filtered playlist' Also i change the logic so that if the option 'only build playlist...' is used to create a new playlist it will always save the filtered playlist as it makes no sense otherwise.
  

Other than that some more refactoring to improve the control for the functions 'next show', 'next clip', 'replay clip' etc. Also if you now use 'replay clip' when the playlist is paused it will replay the clip that is currently played but also reactivate the playlist so it will continue with the next clip once the replay it through unless you pause again.

About the new playmode:
It works quite different than all other playmodes. Its purpose is to give you an overview over the models you have in your collection. Lets say you use the full collection as input it will select randomly one clip for each model and create a playlist that only contains these clips. So if you have 18 Models the playlist also has 18 clips. You can influence which clips by using the filters. But the rest will be done random.
It will select one show randomly and one clip that matches your filters from that show.
I came up with this playmode because sometimes i stumble over models i have completely forgotten about.
This playmode should give me a quick headsup and let me decide which models i want to get to know again.

it can still be found at the website of my friend zebrazuk:
www.kp3d.com/vgmanager.html http://www.kp3d.com/vgmanager.html

For just the update download and replace the jar file with this link
www.kp3d.com/archives/VgPlaylistManager29Jar.zip http://www.kp3d.com/archives/VgPlaylistManager29Jar.zip

@No.6: I was actually thinking of the electronic tune by 'The Mighty Dub Kats' from the late 90's ;) Thanks, buddy.
www.youtube.com/watch?v=gX2CQqPvnys s


@ET: From that Vimeo link you provided:

"Process is fascinating. There is an art to the way that things are made. Oftentimes we find ourselves so enraptured by a work of art that a form of mysticism envelops the creator. In our society this has become something worth idolizing, something artists feel the need to aspire to.Well, we’re not interested in myth. We’re interested in people. In actual people who have incredible talents and the hard work they put in to achieve their results.Often this secretive artistic path is put on a pedestal. We would like to offer something different to admire: the realistic struggle through which people can create great things."

Beautiful thoughts and the video is inspiring too. I'm still working on my masterpiece ;) Thanks for that one, buddy.

Thanks @EverthangForever - but I feel a bit of a fraud for the last two scenes. Most of the work was done by others.

I've been doing a liitle catching up over the last week or so. I realy like the IceCave scene and its variants. Unfortunately the full screen fish is beyond my new graphics card but the smaller one works fine.

@MrCrowley

Really like the lift idea.

@HombreSInSombra

Had to modify my playlist to play the old Steppenwolf song for the Magic Carpet Ride. Like the swarm adaptions and also the way you have been playing with animations for the clip names.

@TheEmu

Thanks for the new shaders. Some of them are great - I'm just stuck for ideas as to where to use them. I'm having a bit of trouble with a few of them (just a black screen and/or compilation errors) and I'm trying to work out why - that's half the fun.

Thanks also to all who have contributed to the scenes either with their own scenes, shaders, artwork, etc.

INTHECRACK is awesome, I love the super close-ups. I know its not everyone's cup of tea, but I personally enjoy counting the tiny hairs on a girl's butthole. Totem already does this with some of their photosets. You know the old saying, once you go in the crack, you don't go back. 😛

totem what would you guys think of charging the winner of the random draw for the outfits half the shipping if they cant come up with the credits then skip to the next name on the list that way this is still somthing for your long term high rollers!!