Error code 500
Server error

Please wait a minute and click on Refresh to try again
If this error persists, contact the support

Lors du téléchargment des clips VR.

Bug Report
Version 1.2.512 / 1.2.514
Musics Page
After first update, None of the Music Boxes are Checked, But the Music still Plays.

found: After Checking Music boxes, Leave the Page and returen.
None of the Music Boxes are Checked.
IF you use Ctrl-A to select ALL or make a windowed Selection.
Any Music In the Window, that was Checked, now shows it's Check Box Checked.
Once the selection is removed, the check boxes all Show as being Not Checked
although the width of the Line that makes up the box is a Bit Fatter and Red on Checked boxes than Not Checked Boxes.

All music Shown Not Checked - even though the Music was checked in 1.2.378
https://www.istripper.com/customdata/forum/2023-05-30/R8dvN9Yj.png

Ctrl-A Selection Now shows the Boxes Checked.
https://www.istripper.com/customdata/forum/2023-05-30/jsAxV4Tn.png

a Window Selection, only the Boxes in the selection show the Checked Boxes.
all music in this Selection are checked.
https://www.istripper.com/customdata/forum/2023-05-30/5lEiTeTM.png
Some Music in this Selection are NOT checked, but can only be seen if you make a Selection.
https://www.istripper.com/customdata/forum/2023-05-30/3JfDbfu0.png

Music page of 1.2.378 Boxes show checks correctly.
https://www.istripper.com/customdata/forum/2023-05-30/OLup74ss.png

This is for a preview already fully downloaded and with just one of the preview slots being used. I log out then sign in again and a random preview downloads over it automatically.

When the app hangs after a sign in, it is stuck on the splash screen and seems to be using most of my CPU. I had to shut down the app through task manager.

Update:

It has only gotten stuck one time out of four.

It didn't download over my preview this last time so maybe it's nothing. 😕

Also, I was playing with the P2P settings so that might have something to do with it.

If I log out and sign back in again, a random preview downloads over the preview I manually downloaded. Before the preview would just disappear from the preview screen

So you're logged in, you manually download a preview (does it fully download or does it stop/do you log out in the middle of the download?), then log out, then a new preview is downloaded, which overwrites your manually downloaded one. Did I understand that correctly? Are you doing this while having 7 previews downloaded or do you have fewer?

The app sometimes hangs after sign in

By "hanging", do you mean it crashes or you just stay on the splashscreen for an extended period of time? Do you have any indication such as the collection is rebuilding (turning iStripper icon in the taskbar)?

About the "Home" tab in 1.2.5xx versions (I use 1.2.514):

If you use UI in full screen (16:9), the rotating promo banners on top take approximately 60% of screen real estate, which I think is unnecessarily much.

If you resize the window from full size and make it narrower, the size taken by promo banners gets proportionately smaller and more practical. Maybe the layout could be changed so that the slide show of promo banners wouldn't take full width of the screen so that it wouldn't take that much space vertically either?

Currently the order from top to bottom in Home tab is this:

• Promobanners
• "Most popular"
• "Latest news"
• "Latest shows"
• "Lingerie" (by the way, why is this singled out of all the categories? Is it same for everyone?)
• "Coming soon"

I would prefer the order to be for example:

• Promobanners
• "Latest shows"
• "Latest news"
• "Coming soon"
• "Most popular"

I would remove the "Lingerie"-section altogether or replace it with similar view of random, or perhaps user defined, category(-ies).

This way the "new stuff" would be visible right away without scrolling, even when your UI is maximized on Home tab.

@Socialhazard wrote:

If you log out it will then ask you to sign in again. Make sure you know your password.

Yes,
the Log Out, has taken the Place of the Old Log in with another Account on the Advanced Setting Page.

It's much easier now, to log out, and log in as a different User.

Make Sure you know your Password !

Ok weird. If I log out and sign back in again, a random preview downloads over the preview I manually downloaded. Before the preview would just disappear from the preview screen. Also, the app sometimes hangs after sign in. I do not recommend loging out. 😕

I saw the Message from @kaiju Here
https://www.istripper.com/forum/thread/52963/9?post=764526

long ago we were told that if a version appears on the Main iStripper page
www.iStripper.com
It is the Official Release version.

It has happened in the past where a Beta version, became the official release version on the Main Page
with no Announcement.

Version 1.2.512 was the version on the Main Page when I made my Post, but it has since been updated to 1.2.514
Also on Discord, Manue made a post that the team decided to make 1.2.512 the release version.

If someone like @WyldAnimal can be *****...

So yes, there is now much ***** over what is Beta and what is a release version.

The Main Page makes no Mention of version 1.2.514 being a Beta release.
https://www.istripper.com/fileaccess/softwarenew

I guess in a way, Every version is a Beta.
Because no Version is ever without bugs.
And even a full Release version can have an unknown bug that is discovered after it's release.

"The version 1.2.378 will remains available to download and you can return to it whenever you like :)"

It's not on the web site's front page which has 1.2.5.14 - is it hidden away elsewhere ?

Windows : https://www.istripper.com/binary/beta/1_2_378/setup-istripper.exe
MacOS : https://www.istripper.com/binary/beta/1_2_378/setupmac-istripper.dmg

Don't miss the extremely rare occasion to spend a moment in face-to-face in VR with the splendid and irresistible Lilly Bella, one of our most amazing discovers in 2023 !

Click here : https://www.istripper.com/vr180/detail/b49e1a2482bda5e7

@JonC001

If you log out it will then ask you to sign in again. Make sure you know your password.

I don't know if this is specific to the new beta or has always been the case.

I was replying to a post by someone who was having a problem. When I pressed the SEND button it failed (unfortunately I can't remember the error message) and any attempt to go back to the forum resulted in a message that the page did not exist

The only way I found to recover was to quit iStripper and restart.

When I did this I found that a moderator had closed the thread while I was compiling a reply and that this was presumably the cause of my difficulty.

I have long felt that some moderators are too ready to close threads, but if they do this should not lock out the whole of the forum as was the case this time.

😄👍

Oops, I left it on CPU mode. So yeah it still does it in GPU mode. 😳
I need my coffee. 😆

.514 is working okay. There still is an odd glitch hovering over a show in full size when the GUI is minimized.

For me the ghost click issue seems to be fixed. 👍 😎

Interesting - for me it's still happening in 1.2.514.

(and ***** addition just in case: it's not only about hovering over the show in full size. It works the other way, too. If you switch to small size --> then minimize the UI --> then hover your mouse over the show, it switches to full size 😄... at least that's how it has been with my 1.2.5xx versions so far. After Wyldanimal's explanation of the "ghost click", this is of course what you'd expect)

I would say that I dont like the automtic installation very much. On two differnt platforms I had problems. In one case it seemed to get stuck because it was "already running". In the other case, the antivirus got unhappy.

Oh I see it now. Yes there are elipsis. No big deal. I resized it again so it does not do that.

@TheEmu
When I resize to the minimum allowed the VR GIRLS and FORUM tab labels get replaced by an ellipsis (a row of three dots) signifying "more" and clicking on that reveals a drop down menu with those two tabs as menu items.

Maybe that is what I am seeing. Lemme play with that a bit more. I resized the screen using a screen manager and all a sudden menu items seemed to be gone. Maybe I did not notice the elipisis.

I've a 8TB HDD to store my Models folder (Data and Bin folders are in another place). With 5694 shows in 3k and lower (the oldest are in 720p and 1080p), it remains 2.6TB free on this HDD.

Okay I got it installed on my laptop. Foer the Norton users out there who may getting stuck, it's "file insight" that gets in the way. I know I added the setup program to file insight but the name seems to change so you need to locate the setup exe file and "trust it" again. Disabling auto protect does not help.

I know that log out has been added to the drop-down menu on the right next to profile name.
However, I do not see a place where one can login or regain access if the app suddenly no longer sees them signed in (without signing out). The ability to click 'login with a different (or another) account' was good. Why was this removed?
What happens if one clicks log out? Is there an ability to log in again?

Nearly time to get some more storage for my collection. Was wondering what other people are using. I'm currently using 4TB internal SSD. How much capacity do I need to complete my collection ? Should I stick with internal SSD (expensive) or normal Hard Drive or use an external drive ??

When you resize the window uyou lose access to menu items?

I don't. Do you mean page tabs ?

When I resize to the minimum allowed the VR GIRLS and FORUM tab labels get replaced by an ellipsis (a row of three dots) signifying "more" and clicking on that reveals a drop down menu with those two tabs as menu items.

I wish I could shrink the window even further with more tab names then moved to the drop down menu. There seems to be no intrinsic reason that the minimum window size is so large.

When you resize the window uyou lose access to menu items?

No, I don't. Strange. 😕

I do not recall seeing anything mentioning about changing the "_custom.jpg" images.
Most of them for the SECs are now fully visible again.
The custom images are still there.
The problem is that the app overwrote each and every one of these (only those that were 'seen' by the app).
How is this possible? Why is this allowed?
I better not search for Viola or her cards will also be fully visible. I really do not want to see her.

(the one good thing, so far, is that I was able to install this version)

When you resize the window uyou lose access to menu items?

Also, I can not install it on my laptop. Norton antivirus really ***** your installer. I tried turning off protection and still can't get past the antivirus. I don't have time to fight this right now.

.514 is working okay. There still is an odd glitch hovering over a show in full size when the GUI is minimized.

For me the ghost click issue seems to be fixed. 👍 😎

Les carousels seront-ils de retour ?

Niet !! Terminé le manège pour enfants il va falloir grandir @ComteDracula 😆

Les carousels seront-ils de retour ?

Will carousels be back?

the icons in the dropdown menu have been moved to the right side,

I only see one icon in that menu, that for Feedback. Should I be seeing more or will the other menu items be given icons in a later version.

an option to activate a slider for the cards size has been added to the advanced settings,

Thank you. Though, as I mentioned in a previous post, I still can see use cases for both more cards per line and for as few as 1 card per line.

.514 is working okay. There still is an odd glitch hovering over a show in full size when the GUI is minimized.

With version 1.2.5.14 toggling between Cards View and Thumbnail View resets the Sort By and Order By options so I have to manually put them back to my preferred settings, Date Of Purchase and Descending, each time I change the basic view.

However, we have decided to make this version available to all in order to collect as much as possible datas from our new users.

I think that is a mistake - at least in the way that it has been done. If someone like @WyldAnimal can be ***** as to whether it was a beta or an offical release then what chance do naive, non-software developer savvy, users stand of understanding that there may be problems with it.

The version 1.2.378 will remains available to download

Where from ? It's not on the web site's front page which has 1.2.5.14 - is it hidden away elsewhere ? Giving brand new users a beta release is not, in my opinion, a good idea.

Little bit of a nusaince with the autoinstall. You have to manually ***** off the running istripper or the setup fails.

help please

how to get free credit?

Please, please, please clarify what is is a Beta and what is an official release.Oh, and after an auto-update it would be really helpful to know what had been changed in the new version (...)

Hello TheEmu

I hear you!

To be as clear as possible, istripper 1.2.512 (and subsequent versions) is a beta. This means we'll iterate quickly, taking into account your feedbacks on features and bugs.

However, we have decided to make this version available to all in order to collect as much as possible datas from our new users.

The version 1.2.378 will remains available to download and you can return to it whenever you like :)

I hope I've clarified things for you.

Cheers.

To avoid duplicate threads, please refer to https://www.istripper.com/forum/thread/52963/9

Thank you

Dear All,

The IT team has been faster than me :-P They put version 514 online and because you had the 512, you got the auto-update.
Here are the improvements in this new version, based on your feedbacks :

• an option to sort by Release Date in the Collection has been added,
• Playlist is back on the Full Screen page + its state is now saved and restored between pages that display it,
• The default size of the application has changed,
• the icons in the dropdown menu have been moved to the right side,
• an option to activate a slider for the cards size has been added to the advanced settings,
• The header now takes skins into account,
• The volume setting now affects the full screen volume,
• The crash at startup on versions lower than Windows 8.1 has been solved,
• The cards state is now saved as soon as it changes and is correctly restored at the next launch,
• The card images in playlist are now grey again when not downloaded yet,
• The crash when downloading too many previews has been solved.

Sky is beautiful with a perfect body.
I am so very happy to have her first card. I plan on getting her other cards.

@eline posted

The auto-update of the Beta is and will remain for the Beta versions only.

Someone else then posted

@celine Version 1.2.512 is the stable version which we can download from the website's home page. There's some mistake here ?

To whch @Wyldanimal replied

The version 1.2.512 / 513 is now the Official Release version, It is no Longer Beta.

Though it was only available via the website and not via the app's built-in check for update/update function on the settings page.

And today I had an auto-update from 1.2.512 (said to be "offical"/not beta) to 1.2.514 - so the situation as to the status of the releases is now as clear as mud. Please, please, please clarify what is is a Beta and what is an official release.

Oh, and after an auto-update it would be really helpful to know what had been changed in the new version. Providing that information would also probably improve the feedback we provide as we could immediately check if those changes had had any adverse effects instead of stubling over them at some unknown, possibly distant. time in the future.

Yesterday, you had the chance to welcome the beautiful Sky Pierce on your desktop, and the 52 first ratings she received give her an amazingly well deserved 4.86/5 !!!

If you don't have her yet, check it out :

I have one pretty big issue though. When my PC starts, iStripper prominently launches on my PC in a non-minimized mode.

If you add -fromSilent to the target command in the properties of the shortcut used to start Stripper then it will start minimised. This was discussed in a few posts in the older thread devoted to this Beta release. For more details see, for example

https://www.istripper.com/forum/thread/52963/7?post=764105

I like most everything about the new version after using it for some time now. Some UI issues I had before are fixed, and the performance is much improved. It also is a more immersive program.

I have one pretty big issue though. When my PC starts, iStripper prominently launches on my PC in a non-minimized mode. I minimize it, and then once again it pops up on my screen, showing everyone that I have this on my PC.

I can disable start on system start, but I don't remember having to do this before. But maybe my memory is just bad. I have the setting checked that says "start disabled", but that doesn't help with this issue.

No problem. 👍 😎

Thank you very much for your answer @Socialhazard 👍

Les habillages fonctionnent dans cette version et j'ai essayé certains des habillages sombres fournis par les membres. Bien que certains textes puissent être difficiles à lire ou invisibles dans certaines situations avec les skins foncés, comme avec les versions précédentes. Si vous utilisez actuellement une apparence foncée, le résultat devrait être le même. Je vous conseille d'essayer la version bêta. Vous pouvez toujours revenir en arrière.

Traduit avec www.DeepL.com/Translator (version gratuite)


Skins do work in this version and I tried some of the dark skins provided by members. Although some text may be hard to read or invisible in certain situations with dark skins as with previous versions. If you are currently using a dark skin it should look much the same. I would try out the beta. You can always switch back.

Sera t'il possible dans cette nouvelle version d'utiliser un skin (pour ma part j'utilise un mode sombre) ou y aura t'il un mode sombre ?
Dans le cas contraire, je ne passerai pas sur cette nouvelle version sauf si j'y suis obligé.
Ayant été opéré de la cataracte, je ne supporte plus les couleurs vives tel que le blanc.

@mkst, thank you for your reply.

I checked with hwinfo and the fan speed of my GPU goes up and down depending on the scene.

For example, in scene ET-FG061A, the fan spun up to a peak of 2139 rpm.

My graphics card is up to date. There must be a bug that causes performance overlay not to detect the fan speed.


@mkst, merci pour votre réponse.

J'ai vérifié avec hwinfo et la vitesse du ventilateur de mon GPU augmente et diminue selon les scènes.

Ainsi pour la scène ET-FG061A, celui-ci a tourné jusqu'à un pic de 2139 rpm

Ma carte graphique est à jour. Il doit y avoir un bogue, qui fait que performance overlay ne détecte pas la vitesse du ventilateur.

Cute

Nice