*Au temps pour moi... je viens de tester et de m'apercevoir qu'en fait sur les fiches détaillées, la croix du ruban bleu apparaît même sans avoir à survoler la carte avec la souris. 😉

@WyldAnimal

Of course! Why was I unable to see that, I ask myself!

Thanks for the avatar info. It explains why my avatar is OK here, but not in the '50 Last Posts, because I had not spotted EndOfLine was quoting me.

The three days I gave as examples all happen to be "National" days of their respective countries, though St. Patrick's day is not Ireland's offical one. I would be more than happy if Poland's national day were to be celebrated by iStripper - or Angola's or Sint Maarten's national day, both of which are also listed as being on November 11.

Ah désolé, je n'en étais pas sûr justement... (J'avais une chance sur deux) 😛

Les extraits des cartes non achetées sont à priori maintenant "stockés" dans le catalogue des Modèles et non plus dans Ma collection.
Ces derniers sont matérialisés par une petite bande bleue superposée sur la carte.

Dans le catalogue, en survolant la carte correspondant à l'extrait que tu possède, une croix apparait et permet de supprimer la bande en question.
Cela marche aussi en allant sur la fiche détaillée du modèle. Au quel cas pareil, une croix apparaît sur la bande bleue quand tu survole sa carte et te permet de le supprimer.

De même, si tu aperçois par exemple un extrait dans le carroussel en cliquant directement sur le modèle correspondant tu tombe à nouveau sur sa fiche détaillée puis en survolant sa carte avec la souris une croix apparaît sur la bande bleue intitulée Extrait, te permettant là encore de l'effacer.

U.S. independance day? Why U.S. independance day? Many countries have their independance day, so why just U.S. independance day should be so important for the others? In my country we have National Independance Day as well. It is connected with the end of World War I, but I guess no one of you know about it and no one cares. Do you know when it is? It's 11th of November, so it's only two and half weeks to that day. I would be very pleased if I could see some special card for this occasion :).

Back to topic. I would like to see more models dressed as heroines from DC or Marvel (or other) comics, rather than seasonal or occasional cards. Shakespeare - that's a way better idea.

... oh, almost forgot - sexy nun's outfit will be ggreat addition :D

merci pour ta réponse mais ce n est pas trop cela que je demandai
mais plus exactement comment faire pour ne pas avoir les extraits des cartes
qui se trouvent dans le caroussel (cartes que je n ai pas achetée )

More seasonal cards, and more "special occassion" cards, e.g. Bastille day, U.S. independance day, St. Patrick's day - any excuse for something a little bit different to the general run of the mill cards. For Shakespeare's birthday how about recreating the scene in one of the old St. Trinian's films where one of the sixth form shocks the school inspectors by her performance of Hamlet's "To be or not to be" speech.

Bonjour @nana08

Je ne suis pas sûr que ce soit bien le sujet de ta question, mais pour désactiver les démos des cartes que tu as déjà acheté, normalement il faut :

1. Aller dans les Paramêtres
   
2. Cocher la case Réglages avancés
   
3. Puis, plus bas dans la section Clips, décocher la case Continuer à jouer les extraits des cartes achetées
   

#Enjoy 😉

DrDoom9
How has the last posting been ascribed to EndOfLine when, actually, I wrote it?

answer. that Member Quoted one of your Posts...

I have been trying to write a little VBA macro in Excel to read names.XML,
and I see that Nancy A is due to return on e0618!

I quoted your Post above... See it's in a Gray box... But I made this post...

EndofLine did the same when he made his post here
http://www.istripper.com/forum#/forum/thread/26420/last#post513392

Why am I and so Many other Missing the Avatar?

There was a system bug, and some of the avatars got corrupted.
Totem was not able to recover all of them.. ( 2500 affected?? not sure about the number )
So they have been replaced by this default one...
I've just been too lazy to go to my Profile and Upload a New one..

Very useful site, thanks for all your efforts and for sharing with the rest of us

I'd like to see more seasonal cards, Halloween, Christmas etc.

Or at least upgrade the existing ones to 1080p.

Happy Halloween!

How has the last posting been ascribed to EndOfLine when, actually, I wrote it?

I really like the new Halloween scene, looks fantastic.

Update (v0.2)

Just added two new functionalities:

• open image in new window - click on small icon in right bottom corner of each image to open it in new window (or tab). Usefull especially with full images (pngs).
• save filter's settings - now you can save last configuration. Settings are saved in cookies, so when you close window and come back later, all filter's settings will be restored. This option can be switched on and off in settings window (small icon next to "Go!" button).

I was just testing another bit of code to cope with the variable-line-content problem a couple of minutes ago, and I see that Nancy A is due to return on e0618!

That is excellent news!

What ?
Not happy that Antonia is here ?
Just ***** about Mea not ?
WOW
ok

???
Well the totem team pointed to lower quality as a reason they are cutting back cards.
???

Forgive me if I don't just take your word for it
You'll have to show me where they posted that
I don't remember it being said

I totally agree with @Number6, @TheEmu and @EverThangForever - more real striptease, fewer nude starts, the occasional bike, chair, bath. cage
Anyway, the pictures in the Victoria's Secret Catalogue don't move - nor the Agent Proocateur, nor the Axami. But I do find them to be sexy pictures

Well the totem team pointed to lower quality as a reason they are cutting back cards. I can tell you right now, if they get Mea Melone, and she shoots in Paris all the time, Mea will automatically be a top 5 girl all time. She has everything that an istripper girl should have. Great athletic ability, beauty, flexibility, and a ton of personality and skill.

@fortuna1993

Did she lose that weight she put on? I know she got kinda chunky all of a sudden earlier this year. Her old body was flawless, so I hope thats the Lexi we're going to get!

As the title states, this particular sale was only good from Sept 2nd til Sept 9th

Sorry........
Nope, can't help you with that

The act of slowly peeling off stockings can be very erotic, but it seems to be a lost art and all we have now in most cases is a rush to be naked.

@TheEmu's comment summed it up brilliantly. I hope chairs as accessories can make a return now & again, so leg-lovers get some time to enjoy.

sorry but there is no discount tab
can anybody plz help me with that

looks like we are gettin Lexi Belle soon :)
from her Twitter-Page in September

Hello guys !
New scene : SW New
http://scenes.virtuastripper.net/titiii_SW_New.zip http://scenes.virtuastripper.net/titiii_SW_New.7z

• watch with starwars music ;)
  

Enjoy!

Halloween!!
https://www.youtube.com/watch?v=QThfGZTLFJo

Schade, dass der Wettbewerb vorbei ist.
https://www.youtube.com/watch?v=QThfGZTLFJo

I made a mistake in my previous post, here is the corrected text (with a little extra explanation).

When adapting the Shadertoy.com scenes for iStripper I have often encountered this sort of lack of initialisation, most often only affecting gl_FragColor.a.

Though the Glsl standard does not specify any initialisation for gl_FragColor but Shadertoy.com seems to initialise it to vec4 ( 0.0, 0.0, 0.0, 0.0 ), but Shadertoy ignores the final value of gl_Fragcolor.a which effectively ***** it to be 1.0. Some systems will explicitly initialise gl_FragColor, some not, and if they do it is system specific what they initialise it to. The worst case is systems that do not initiaise it, but where it is almost always "accidently" set to something sensible, but which may not do so after any software chane.

iWant :D

bonjour tout le monde
je voudrais savoir si il est possible de désactiver les démo
pour ne pas qu'elles apparaissent lorsque je joue les clips de plusieurs cartes a la fois
merci pour vos réponses

Nancy A in our studios last week...

@lezardo
I synchronized also and the original and the Halloween2 scenes are working fine.
I really like this effect.

lot of thanks again to you

@lezardo, @Virt4B

When adapting the Shadertoy.com scenes for iStripper I have often encountered this sort of lack of initialisation, most often only affecting gl_Fragcolor.a.

Though the Glsl standard does not specify any initialisation for gl_Fragcolor but Shadertoy.com seems to initialise it to vec4 ( 0.0, 0.0, 0.0, 1.0 ). Some systems will explicitly initialise it, some not, and if they do it is system specific what they initialise it to. The worst case is systems that do not initiaise it, but where it is almost always "accidently" set to something sensible, but which may not do so after any software chane.

hm ok don't have these rays of light from the pumpkin here.. so what at least it doesn't look totally broken anymore
Edit: not sure what else you did @lezardo but it can't only be the initializing because i had done that already. But after synchronizing i now also see the rays of light.
Thanks a lot!

Open "Halloween.scn" and uncomment lines 84-88, then you will se the difference ;)

the scene is now updated online, you can click on 'synchronize' it will redownload the scene.
@starryk, the scene looks like this: https://youtu.be/_jV1bHtNgwI

If someone can tell me what the other shaders do that would be nice.
I am pretty curious about that.
for me the scene without the sparkle looks like just a girl dancing in front of a halloween background image.

@lezardo: I added the line to the original halloween scene and even reactivated the sparkle.fsh and guess what. the scene works. but honestly i don't see a special effect other than the sparkle in bg.

excellent ! I will update the fullscreen right now :) thanks a lot guys

Wow Bingo!!!

with this addition it is working!!! (gl_FragColor = vec4(0.0);)

great job - thanks to you @lezardo and @emu

now Halloween glows ;)

thanks a lot

the emu: that's a good question ....

Virt4B: can you try to add: gl_FragColor = vec4(0.0); just before this line: for(int i=0; i < NUM_SAMPLES ; i++) ?

Antonia - we will see how sexual, how great dancer, how athletic and how flexible she is.

can you try with this:

for(int i=0; i < NUM_SAMPLES ; i++)
{
textCoo -= deltaTextCoord;
vec4 sample = texture2D(texture0, textCoo );

sample *= illuminationDecay * weight;
gl_FragColor += sample;

illuminationDecay *= decay;
}
gl_FragColor *= exposure;

Following Virt4B's last post I have looked at scatering.fsh. I see that in this shader gl_Fragcolor is not initialised and will have some random value when the shader is executed, but I am not sure how the use of multiple shaders affects this.

addition

sry mixed 2 things

in the original scene it's working with the 2 rows

in the Halloween2 scene become black screen when I change the 2 rows
but if I rename the file it's working also - but without the shining effect

hi and thanks,

installed it and its the same - white squares

but if I activate the 2 commented rows in the scaattering.fsh (thx to @dar2112v for the tip)

// sample *= illuminationDecay * weight;// + cos(u_Elapsed*1000.0)/500.0);
//gl_FragColor = vec4(0.0);

instead of the immo actviated onces the Scene is working - without the shining effect - but without the white squares

we are not able to reproduce that white squares bug in the fullscreen here.
however I made a lighter version of the fullscreen, could you try to download this: https://www.istripper.com/software/scenes/Halloweenv2.zip pls ?
just unzip it in the screensaver folder, a second halloween screensaver should appear (with the subtitle 'trick or treat! v2).

Please keep in mind that the girls are Models, hired from Modeling Agencies. Most haven't done any professional Stripping.
Expecting all nude models to be well versed in "The Fine Art of Striptease" is more than a little unrealistic.
Not all porn actresses travel the clubs as feature acts either.
Also, the girls are only in the studio for two or three days at most. There's no time to teach.

Might be a good idea if we all get out a little more
See the real world every once in while

Thank, who is the girl on the theme ?

Well, Lover of Orcs........
Apparently, they just chose not to cast Antonia at that time
Or maybe it took quite a while to get her scheduled
She's in Paris......right now

https://www.istripper.com/forum#/forum/thread/34428/1