https://www.istripper.com/forum/thread/29408/81?post=773275

Thanks @Calgon
FGA241-FGA248
Eight selected WebGL shaders remixed & converted to OpenGL
to run &/or remix on iStripper's Fullscreen OpenGL platform.
Standing or table work randomly applies to all these scenes
unless otherwise captioned.

https://scenes.virtuastripper.net/ET_FractalGardenA241-A248.zip
https://scenes.virtuastripper.net/SceneImages/ET_FractalGardenA241-A248.jpg

zip size = 286 Kb
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
https://www.istripper.com/forum/thread/27449/157?post=773276

How do I make a playlist? There used to be an option to look at the individual clips and ***** to playlist creator, and I do not see option for that tab, i see the main tab, pictures, videos and one to take to all card pages and the review tab. Where is the one or how do I access the individual clips to ***** and mix girls to make playlists?

Sophisticated lingerie for a sophisticated woman... super sensual and amazing pussy!
Enjoy Vivian's VR video here :

https://www.istripper.com/vr180/detail/a3c0409a02e9d57c

My problem with swing clips is they mess positioning of the clip - the girl starts dancing on the top bar of whatever window I have open and the show ends.

I delete them for that reason only.

😍😍😍

I don't think you're really losing much disk space on swing clips, most of them are only a minute or less in length (two or three clips sometimes per show). In fact if you deleted all of them you'd probably gain about a few hundred mb back (maybe half of a gig :) I don't mind them in fact to my previous point most of those clips are too short to enjoy anyways they pop up and are gone again before you know it. If only most table xxx clips were that short..

Ah, Kelly. We'll never get enough of our dear Kelly.

That's look like an problem with hanging Intel HD graphic driver - the ig9icd64.dll is part of the Intel HD Driver and provides the open GL Driver for your Intel HD graphic driver.What about using the Intel HD graphic driver 31.0.101.3413 - what happend then?

The latest version for my Intel UHD 620 graphics on Intel's page is 31.0.101.2115. After I installed them, iStripper 64-bit started working again, but the "Settings" panel was blank. After reseting the "Scale and layout" from 125% back to 100% in Windows the settings are visible again :-).

Thank you for the hint.

My dudes / red head lovers, this one is for you!!

Today marks the first release of Lumi's iStripper shows. She SUCH a performer y'all!

Make sure to check her new show out!

https://www.istripper.com/models/Lumi-Ray/Illuminate-My-Nights-e1929

I confirm the music files and bonus videos issues several users have been experiencing on 64-bit iStripper versions are now totally fixed to me, without need of any workaround, on 1.2.544.
Thanks.

@Crapples please try again, it's just been fixed :) Sorry for the inconvenience!

Lumi Ray - Illuminate My Nights - e1929 - iStripper - wont download

14 pounds to a stone ... I remember it well 😊

Shelena - The Crew Is There For You - f1423 - iStripper XXX
Vivian Grace - Séance Démoniaque - f1412 - iStripper XXX
Lumi Ray - Illuminate My Nights - e1929 - iStripper
Alissa Foxy - Lingerie Sensuelle - f1398 - iStripper XXX
Carla Vyxx - Jurassex Spark - f1433 - iStripper XXX
Kelly Collins - Something In The Way - e1922 - iStripper
Nuria Millan - Heaven On Fire - f1406 - iStripper XXX

A friend of mine from over the pond finds it funny to state his weight in stone!
(he also orders shots at the bar in drams!)

👍👍👍 as are they all 😍 but some (like Gloria) are more so 😍💖

we are totally off topic now but when you have a large collection, it's easy to forget some models ... now i have to binge watch Gloria for a while 👍👍👍😍😍😍

To be honest I hardly notice the differences - she's still beautiful by whatever measure 😍

Hah .. well there's consistancy for you 😕

On the website I see imperial measures - Gloria's height for example 5.12 feet, while on the App she's 1.56 meters.

@stefnev1 .. I never knew it was language controlled .. well done developers👍
but I'm guessing English is Imperial only and whereas that works perfectly for the USA (here), most English speaking countries (like England) use metric. cest la vie.

maybe it uses region ... if YOU select English, what system of measurement are you given ??

No, the way they work is just normal speed and forward only.
There is a slow motion option you can access via advanced options.
Need 100 shows for that...

Reaching 100 shows in your collection makes you a PLATINUM member. 50 free credits are added to your account and you get -30% on all the shows. But that's not all! Now you can access the 'platinum' and 'nude girls' sections of the forum; our very old collection of Virtuagirl shows in 480p get unlocked for you in the store and two new commands 'slow motion' & 'pause' appear in the advanced settings (contextual menu in «controls» section)

Hi, is there any way to fast forward or rewind a clip from a scene?

Is there anyplace on the web where I can download stripper music to use with iStripper?

@moohamin12
In the setup tab, if you choose the actual language of the GUI to "french", you will have the metric system. That's what I have on my PC.

@moriartyk66 Or find an image of the face you mention and post the link here like this for example.
https://tenor.com/view/kp0-surprise-shock-what-no-way-gif-12709847860664080636

If I wasn't already too old, that would be my absolute dream woman, just the face and those heavenly eyes and then that body, I don't think I would ever find anything more perfect and lovable at any point in the future. Hugs and kisses Christian😘🥰😍❤️

returning 404

You can post pics and ask here:
https://discord.gg/istripper

@muttonjeff
so pity

@moriartyk66
We are no longer allowed to post pictures on the iStripper Forum (stopped 2 years ago due to VISA)
However, you can post photos on the iStripper Discord pages or you can post a link to an online store page / file sharing site

For the girl on the left

Pour la fille à gauche


// Reflections of the secondary clip on the floor.

clipSprite { // LeftGirl clip reflection.
pos: -680, -470, 20
rot: 180, 0, 0
scale: -1, 1, 1 // Scale of the node x, y, z.
source: LeftGirl // This is the id of the clip. Has been created using clip node.
standingHeight: 500 // Expected height of standing clips. The sitting clips are scaled accordingly.
opacity: 0.3 // Opacity of the node from 0 (Completly transparent) to 1.
}

clipSprite { // RightGirl clip reflection.
pos: +670, -470, 20
rot: 180, 0, 0
scale: -1, 1, 1 // Negative scale for mirroring.
source: RightGirl
standingHeight: 500
opacity: 0.3
}

// Left secondary clip

clipSprite {
pos: -680, -470, 20
source: LeftGirl
scale: -1, 1, 1
standingHeight: 500
color: 1, 0.9, 0.9 // Indicates the color filter of the node. Each pixel of the texture will be filtered by this color (RGB from 0 to 1 for each composant).
material: true // true or false. false is the default, true indicates that this node will be influenced by lights.
resolution: 20 // How many rows and columns are used for light calculations with this sprite. The default is 1, adding more rows and columns get better results.
}

light {
pos: -680, -1000, 100
color: 0.9, 0.9, 0.9 // Light color (RGB).
}
light {
pos: -680, -400, 100
color: -0.4, -0.4, 1 // Blue one.
}

Here's the change I made for the girl in the middle, to get her and her shadows in the right direction.

Voici ce que j'ai fais comme changement pour la fille du centre, pour qu'elle soit dans le bon sens, elle et ses ombres.

// Main clip with shadows

clipSprite {
pos: -0, -150, 200
rot: 90, 15, 0
scale: -1, 1, 1
source: Center
standingHeight: 750
opacity: 0.15
color: 0, 0, 0
}
clipSprite {
pos: -0, -150, 200
rot: 90, -15, 0
scale: -1, 1, 1
source: Center
standingHeight: 750
opacity: 0.15
color: 0, 0, 0
}

clipSprite {
pos: 0, -150, 200
scale: -1, 1, 1
source: Center
standingHeight: 750
color: 1, 0.9, 0.9
}

// Main clip name

clipNameSprite {
pos: 0, -180, 200
hotspot: 0.5, 1
source: Center
}

// The chairs and the table
// sprite {
// pos: 0, -50, 250
// hotspot: 0.5, 1.0
// source: MyForeground
// }

// Congratulations! You made it to the end of the script.
// Write your own now!
}

There seems to be a mirror effect for the girl on the left of the screen, and the one in the center.

The writing on the left / right is reversed.


Il semble y avoir un effet miroir pour la fille à la gauche de l'écran, et celle au centre.

Les écritures gauche / droites sont inversés.

I found that I can't share pictures here.😟
I can't find the button to upload pictures.

Does anyone like this expression as much as I do?I want more cards with this expression!😆

yeah ... it's called a calculator ... 😊 ... just kidding.
guess you're gonna want her vital statistics in metric too 😊
better to quote both imperial and metric .... anyway, I prefer Imperial so I dont have to convert

Thanks for the info guys. Scene looks great now; and the girls are sexier than ever!

Hello,

I notice the height description has changed from cm to feet now. It makes it slightly harder for those not used to the imperial system to understand. I also don't understand lbs. Seeing a model at 123 for weight is surprising for one.

Is there a way to swap from imperial to metric?

Thanks.

Maybe you check the brightness settings of your screen, because they look totally fine on my end.

That's look like an problem with hanging Intel HD graphic driver - the ig9icd64.dll is part of the Intel HD Driver and provides the open GL Driver for your Intel HD graphic driver.
What about using the Intel HD graphic driver 31.0.101.3413 - what happend then?

Kelly is not only the most beautiful of all models for me, but also the most humane, most tolerant and funniest I have ever had the pleasure of meeting. She's my Angel💖😘😍❤️

i just tried to watch the clips that are on her profile ... who was filming this ?? the lighting is sooo bright you can hardly see her 😢😢😢😢

Excellent !!!! 😍🔥🔥🔥

@Zantiev

Do I have to adjust some coding in the shadders .fsh files in order to make it work with my scenes?

That depends on what is in the fsh file. If you post whatever is causing problems someone will probably be able to give you some pointers.

p.s I'm glad you're back, I loved your camping and computer scenes.

We're not young anymore so it was just a matter of time before the band broke up.

OT I know, but I could not resist...
@Zantiev Perhaps we should tell The Rolling Stones? 😆

@Zantiev wrote:

" ... as this site does not have a jump to page option ... "

Well there sort of is a way to Jump to a specific page.

once you Navigate to a Different Page.
the Address Bar will Now Display the Page on the end of the Address.

here is an example of this Thread.
that 159 is Page 159 you don't need the post number, so you can just leave that out.

https://www.istripper.com/forum/thread/27449/159#post773124

https://www.istripper.com/forum/thread/27449/159

so if you highlight the 159 or the 159#post773124 in the address bar and change it to 50

https://www.istripper.com/forum/thread/27449/50

then you will Jump to Page 50 when you press enter in the address bar.

@Wyldanimal

Thanks for the links and the directory contents to those scenes as it is greatly appreciated! I guess I was just wondering if any of my old download links still worked as it's been almost a year since I did anything with the scene creations. I'll just go through every page in the other forum to try and find them to see if the download links are still active. As far as the missing folders go in Google Drive, Sandi reminded me last night after I posted my question that I did indeed delete those other folders in google drive last winter since I was in the process of fixing them. So your links are very helpful as it gives me a base to work with.

It's been a wild year n I forgot what I had done before my laptop problems as two band members of our 5 man band had passed on this year n I had to re-invent myself once again considering the band is no more as the remainding members moved on with their lives. We're not young anymore so it was just a matter of time before the band broke up. It was a sad year but it was time to move on to new challenges n career choices. So now I have more free time and was thinking about finally fixing those scenes I had never had a chance of completing. I discovered late last night that I can access the forums section through the iStripper software but the links I did find didn't work or are inactive.

I'll work it out one way or another and hopefully I can manage to finally fix those scenes considering I have to start fresh and anew once again. I remember my biggest hurdle was working with shadders as I just could not for the life of me get it to work properly with some of my scenes. Maybe my problem was trying to resize the shadders instead of leaving them as they were and design the scenes around the required shadder effect but I'm not sure. Do I have to adjust some coding in the shadders .fsh files in order to make it work with my scenes?

our dearest sweetest wildest Kelly Collins is BAAAAACK

❤️❤️❤️

I've tested and here are my final results.
I also hidden the Chairs and Table in the front.

// Main clip with shadows

clipSprite {
pos: 0, -150, 200
rot: 90, 15, 0
scale: 1, 1.2, 1
source: Center
standingHeight: 750
opacity: 0.15
color: 0, 0, 0
}
clipSprite {
pos: 0, -150, 200
rot: 90, -15, 0
scale: 1, 1.2, 1
source: Center
standingHeight: 750
opacity: 0.15
color: 0, 0, 0
}

clipSprite {
pos: 0, -150, 200
source: Center
standingHeight: 750
color: 1, 0.9, 0.9
}

// Main clip name

clipNameSprite {
pos: 0, -180, 200
hotspot: 0.5, 1
source: Center
}

// The chairs and the table
// sprite {
// pos: 0, -50, 250
// hotspot: 0.5, 1.0
// source: MyForeground
// }

// Congratulations! You made it to the end of the script.
// Write your own now!
}