Getting verified is the key, which again someone had to do for me as I was failing the tests.
So hope for everyone. 👍
-----
On Discord if you are offline for hours you get indicators in red so you can go straight to the topic, while on here you can only see it by chance reading through everything.

Interesting

@wrightsayswow Cool beans. 😎 👍

@wrightsayswow can tell you about Trusted Members.😀

@Socialhazard I'v been offline for a few hours and missed all the fun 😆😆😆
As for Trusted Members as @stefnev1 wrote

"Trusted member" is a level with no real signification

Only it does turn your name yellow - so if you like yellow good to have.
I think if the Totem Team trust you they give you that and of course could also take it away again.
Getting verified is the key, which again someone had to do for me as I was failing the tests.
So hope for everyone. 👍
-----
On Discord if you are offline for hours you get indicators in red so you can go straight to the topic, while on here you can only see it by chance reading through everything.

@DrDoom9

That sounds as if either whatever you are rendering the shadow into (framebuffer, quad or sprite) is too small so that much of the shadow would fall outside of it or else that you have not positioned the shadow properly - perhaps you are positioning it so that its feet are in the centre of what you arerendering onto when what you really want is for them to be near an edge.

In order to keep the processing power needed by the shader to a minimum then you want what ou are rendering it into to be just big enough for the shadow to fit otherwise you are wasting GPU power on empty space. this also means that you want to position it so that it just about touches all four edges of the rectangle it is being rendered into.

I often find it useful when developing these things to add an oversized distinctively coloured quad as a background element in the framebuffer - you can quite safely make it many times bigger than the framebuffer as it will be clipped at the edges of the frame buffer. If you give such a huge quad a hotspot of 0.5,0.5 you can be sure that it will fill the framebuffer and hence make its edges visible. Make it partially transparent if you want to see things behind the framebuffer.

Also you can use one or more small distinctively coloured quads as foreground elements in the framebuffer (or anything else) to act as indicators as to what point some set of position co-ordinates correspond to and these will help you position other, more important, things. A refinement of this would be to use long thin quads to provide a cross or even a grid as a positioning aid. If you do use small quads aspsitining aids yu can animate their transparency to make them flash on and off which can make them stand out more if that is needed.

😂😊😎👍

@Socialhazard

I am not beyond enjoying a free sample every now and again. 😆

Don't worry i'm aware of that 😊
https://www.istripper.com/forum/thread/46166/12?post=724678

@Stanston 😎

Having said that, I am not beyond enjoying a free sample every now and again. 😆

but a simple rule is that if something is free then you are the product.

I will not disagree about that too,
but at the end we are all products from ourselves 😆 ... kinda.

@SatansFarmor here is the example for that Disclaimer within the Girls Store.

That's true, but a simple rule is that if something is free then you are the product. I'm not knocking it. Just saying. 😀

Also I agree the name "Discord" is ironic and in bad taste.
They should have spent more than five seconds on the name. But what's done is done.

I was doing some "Link Digging" 😇
Not sure if it's helpful but at least it is containing some more Information about that Subject.

https://www.reddit.com/r/discordapp/comments/4itsnj/why_did_you_guys_name_discord_discord/

https://www.protocol.com/discord

https://logo.com/blog/the-history-of-the-discord-logo

But independent from the Name, the complete Discord Service is free to use for everyone,
and i think for an free to use Service/Software it's pretty great i think.

Also the Team/Moderators/Members are now visible through their Online Status,
which is not the case within the iStripper Client.

At least from my point of view there are a lot of advanatges in compare to an static Forum.
It needs for sure time to evolve, but i think this is the smallest "problem".

And as far as i can tell people do love free goodies isn't it? 😀 ✌

😆 I know right.

The 2700p h265 60FPS clip is missing, in the Oculus-Vive section

Thank you.


Il manque le clip 2700p h265 60FPS, dans la section Oculus-Vive

Merci.

Also I agree the name "Discord" is ironic and in bad taste. They should have spent more than five seconds on the name. But what's done is done.

Yes = I wonder if the originators of it looked up the dictionary definition - "disagreement between people"

😆

Everyone is on it today. Nice work Mods 'n Members. 👍 😄 😎

They were having some teething issues but seem to have a handle on it now as I see it from the outside. I support the attempt to transplant the community culture over to Discord even if I won't be there. I was so close to fitting in too. 😄

Also I agree the name "Discord" is ironic and in bad taste. They should have spent more than five seconds on the name. But what's done is done.

And here is the Link with the Information from lukaszr.
https://www.istripper.com/forum/thread/36785/6?post=714062

If you look, on the details page of all new cards we include a disclaimer if it is a "table only" show.

Otherwise, refer to the excellent Workshop by Lukaszr that gives you the breakdown of clip types on a card - though not until a day after release to give him time to do it.

Look for the disclaimer at the bottom of the card. "Table Only Animations" Many XXX cards are of the mixed type with pole, standing, or both type clips as well as a couple of XXX table clips. Cards without this disclaimer are with mixed clips.

Hey I suggest that you can see show types on cards you have NOT baught.

So I really dont fancy table only cards...or table shows in general with a very few exceptions.

So when i see a XXX card, I normaly dont buy them, even if I like the model,
bcuz I dont want to buy a card that I will never watch due it´s only table shows.

"Trusted member" is a level with no real signification. "Verified member" is the key to access all the Categories and Channels in the iStripper Server on Discord. The verification is used to see if you are a human and not a robot which should spam or break the server.

@Sexy3DBoy

Verified Members have access to more channels vaguely similar to iStripper forum access levels. @wrightsayswow can tell you about Trusted Members.

Your welcome. 😀

@Socialhazard Thanks

What is the difference between "Trusted member" and "Verified Member"?

👍 @stefnev1

@Sexy3DBoy There is your answer I think. 😀

@Socialhazard
Yes, the moderators can do some things to help. If they can't, the team is asked for.

@The Emu
Forgive me - I am still working on shadows!
I do not seem to be able to sheer the shadow enough. I would like an angle of about 20 degrees below the horizontal.
Then, since I do not really understand the framebuffer size and the node size, the sheered shadow gets clipped at, say, about thress-quarter height.
I am trying to use a camera distance which results in screen dimensions 6000x3375. The girl is dancing in the centre, about 2/3 way down.
Do you have any words of wisdom for me?
Regards ...

@Rhaegar
Lots of recent XXX cards have only few explicit clips, in all the other clips you can see the girl dancing and streaping before the masturbation.

A moderater can manually verify you if you have a problem. Contact them and let them know.

No, you're not dreaming! She did it again!
And this outfit gave her very very naughty ideas :-P

Check it out : https://www.istripper.com/vr180/detail/0dca1ab70b484313

@Socialhazard
Yes, one time.

You only need to be verified once, right?

Yes exactly I need to be verified like the other members.

You only need to be verified once, right?

I cannot use the captcha.bot/verify

No need for that any more i guess.

I cannot use the captcha.bot/verify

sexy3DBoy#1120

Is someone aware about that?

I probably should have checked this before.
There are two Users with the Name henrylee7 and one of them is already a Verified Member.
I'm not sure which one of these is your Account, but if you are the "Orange Account"
then i would say, problem solved 👍

Because Discord is chaotic, people have problems with some authentication
and confirmation of membership ... So there are still problems

To move everything from one Platform to another is always combined with complications.
Or with another words, Rome was not built in one day too.

Complications and Problems are in fact only Situations which can be always solved.
I also don't see people strugglin on Discord about these problems at the moment.

And even if someone has a Problem or a Question, now the people and/or the Teammebers
can help in real time, instead of waiting several hours on a static Forum for an Answer.

And here you have an very good example for this Situation 👍

https://discord.com/channels/709339443777110026/875304266477232148/890491451081904168

@mentorx
I second that. It's so disappointing to see all the XXX cards lately. I wanna see a hot striptease and not a girl masturbating. There are so many sites that offer masturbation scenes. But a hot erotic show with good strip tease and pole dancing is hard to find nowadays.

I don't understand why iStripper is going this way.

people have problems with some authentication and confirmation of membership

If you read slightly above,
https://www.istripper.com/forum/thread/48314/4?post=725943
@Wildanimal is here to help these people with these issues. 😉

This is the beginning of the dying forum on Istripper ... Discord is not very intuitive people have a lot of problems Today no one has time to learn how to use a new program to write a comment or create a thread ... Just like gambling causes customers to leave with money to other sites, the same new problematic program instead of the usual forum will cause another approach from Istripper .... It's a pity because some people probably wanted to feel like a member of the Istripper community Now people are deprived of this aspect ... I know soon someone will write that it is not difficult that you can write there and post photos .... And I see that it's not true. Because Discord is chaotic, people have problems with some authentication and confirmation of membership ... So there are still problems And for me, the forum itself, without the possibility of viewing or posting photos, is not enough attractive and I just don't want to use the new program ... It's the beginning of the end of Istripper ..

Hello bunnies!!!

Proud to present Asia Vargas and her very first show"One for Alberto" NOW on iStripper! 😘
She really puts the ass in Vargas!!! 😳
Watch this sublime Columbian play with her two big dildos in her tight white dress, which suit her like a glove might I add! 😈





Are you ready for Asia Vargas? This hottie with a body comes to us from Columbia, although she currently lives in Madrid. Asia is 32 years old yet she does not look a day over 20!😛

Take advantage of the first one of her shows to get to know her a bit better!!! 💋

Whoever chose it is an idiot.

I would like to introduce you "that idiot" which has created this really nice piece of Software.

https://www.crunchbase.com/person/jason-citron

If you want to you can give him some Feedback on his Twitter.

https://twitter.com/jasoncitron

But i think it's not a good Idea to call someone an Idiot which is showing his Face to the World,
and giving the people a Platform where they can have Fun together 😎

"Discord" is a ***** name for an application. Whoever chose it is an idiot. They probably don't know how to use a dictionary.

Is now 80% Istripper XXX cards and only 20% Istripper cards?

To me Istripper became Istripper XXX. Because in last weeks we can see MANY Istripper XXX Cards. This is undeniable. So, in this poin, Istripper is really deteriorating.

@EverthangForever

changed Pingpong to pingpong

That should not matter. The only place in a .scn file where upper/lower case matters is in file names, and then only on Mac systems (unless you have an unusual setup such as not using a system's native file system to store the files).

I remember now that there is a bug in the log message reported when the curve type is not recognised - it is logged as an unrecognised repeat code error not as an unrecognised curve Also note that a missing comma between the repeat code and the curve type can cause this.

I raised a bug report on the misleading message quite some time ago.

Discord Update

I now have Two Channels set up for Scenes.
One Channel for Tutorials and Scene creation Info.
And a Second Channel for Scene Sharing.
Since the Channels on Discord have an extra Level of Messages called Threads
When you Share a Scene, you can Create a Thread dedicated to that Shared Scene.
All Discussions can then take place in the Scene's Thread

So that eliminates the Need to have a Discussion Channel.

If you Already Have a Discord Membership and have Joined the iStripper Server and Have completed the Verify Process
you can Jump to the Channel with this Link
https://discord.com/channels/709339443777110026/890398013758001222/890399878830768188

If you Don't have a Discord Membership
You can Create one Here. Do that 1st, create your Discord Member.
https://discord.com/

I prefer to use the web based Interface
but you can Install an App on your Android Device, iOS Device, or Windows OS, or MAC OS
NOTE: Apple iOS and MAC OS, Block Access to Adult Content on Discord.

Once you have your Discord Membership

then you Can Join the iStripper Server
Here is an Invitation to Join.
( become a Discord member 1st, then Join )
https://discord.gg/xBfap7HwsP

After you Join, Read the Channel How to Get Veirfied.
https://discord.com/channels/709339443777110026/887851840987881576/887853127762583572

All Members Must be Verified

Once you are a Verified Member
you can Access the Channels and the Scene Sharing Channel.
https://discord.com/channels/709339443777110026/890398013758001222/890399878830768188

Discord has features we don't have on the iStripper Forum
1) if your Scene Zip is Under 50MB you can upload it directly to the Thread **
2) You can post Links to Video Clips, and a Live Preview will be created so you can watch from the Thread
3) the Ability to Create a Thread from a Post, Keeps all of the Scene Discussion In that Thread.
No Need for a Separate Scene Discussion Channel.

** The iStripper Server on Discord has Been Boosted to Level 2
this give all members a 50MB upload limit.
We are 3 Boosts away from Level 3
At level 3, all members Get a 100MB upload limit.
( also, if you Subscribe to Nitro, you automatically get a 100MB upload limit. )
https://discord.com/nitro

I have a Nitro Subscription.

Also,
Some Members have concerns about Linking their Cell Phone to Discord.
I can Absolutely tell you, you DO NOT need to link your Cell phone to Discord.
as a general Member you do not need to link your cell phone number with discord.


As a Moderator, we have to use Two Factor Verification of 2FA

You do Install an Authenticator App based on RSA security on your device.
Cell phone, Tablet or Desktop.
I have the Google Authenticator, but there a several different ones you can choose from.

When I sign in to Discord
I present my Discord User e-mail
and my Discord Password
Confirm that I am Human
and then Fill in the Authenticator Code I get from my Cell phone.

My Cell phone is not linked to Discord, Discord doesn't know my Cell phone number.

We will get there - where ever there is? A few weeks back I had problems initially getting access, then getting my head around how it works etc. Good point about the forum, at first I hardly bothered with it because not much to see until you have enough cards. The Discord iStripper server is taking shape, some very nice shapes you will like. We can mould it even more over time.

@Number6 and @All

on Discord we were having issues with New Joins Posting Spam in Every Channel.
So to combat that, Non-Verified Members only have access to a very limited number of Channels.

ALL Discord Members need to get Verified.
it's an Automated process by a BOT called Server Captcha Bot.

But, Moderators can also Manually Verify a member.
But that Member has to notify us, that they need help.
unfortunately, we don't have a way to filter, which Members are NOT verified.
We can only see which Members ARE verified.


@Number6
you were missing the Verified Member role
I just added that role, so you should have full access again.

Here on the forums it is very Similar.
A New Member does not have access to the Forums.
They Can't post on the Forums.
After their 1st card purchase, they become a Bronze Member, and gain access to some of the forum.
After their 10th card they become silver and then after 40 gold, and after 100 Platinum.
at each level they have access to more of the forum..

On Discord, There currently is No Way to Automate, adding the iStripper Level
to a Discord Role.
The Two systems Don't yet talk to one another.

it has to be done Manually