FG339-349 runs great. 👍 😎

No problem. <(^_^)>

found it. thanks

Click "settings" cog wheel at the top right of the client, tick the box for "Advanced Settings", then under "Display" tick the box for "Display Clips List".

I have more than 100 cards and I'm a Premium member but I still don't know how to select a specific clip.

hello

💚💚💚

Sofi Vega - Bootleg Boogie - e1751 - iStripper

💚💚💚 J-4 😜

@Philours bienvenue à nouveau merci, bon à savoir.. Je vais regarder ces trois
@Philours welcome back thank you , good to know..i will look at these three 👍.

@TheEmu its unfortunate for fullscreen that inout lost its original meaning ( ie: walking from the side onto the center stage ). These days (with the new meaning) I tend exclude 'inout' using deny, unless i forget.
i am mindful that in doing so I am probably excluding many good older clips from my scenes.
Where I have used it, don't think 'deny: inout' affects other standing clips, just these older ones.
At least i have not noticed any newer standing clips being excluded by 'deny: inout'

Merci pour ces nouvelles scènes @EverthangForever 👍 Quelques saccades pour ETFG346, 348 & 349

Thank you for these new scenes @EverthangForever 👍 Some jerks for ETFG346, 348 & 349

@EverthangForever

The default is to allow anything but if an explict allow clause is used then only clips of the types specified are permitted. My understanding is that there is a ***** complicaton in that there are two kinds of "tags" that can appear in the list

Basic types - Pole, BehindTable, FrontTable, Cage, Glass, Top
Modifiers - Accessories, inout

(Table is equivalent to BehindTable, FrontTable)

If the allow list specifies one or more basic clip type then these are alternatives, so if

Allow : Pole, Cage, Glass

is specified then the clip played could be a Pole clip, a Cage clip or a Glass clip but no other type should be played.

If a modifier is added then rather than being an alternative to the basic clip types specified in the clause it adds a further constaint, so

Allow : Table, Pole, Accessories

would allow either a Table clip with accessories or a Pole clip with accessories but no other clips to play.

I am pretty certain that inout used to behave as a modifier but this may have changed when they reused inout to mean clips played at the edge of the screen.

The same logic is used fr Deny clauses.

Kelly Collins - Boho Pink - f1044 - iStripper XXX
Sofi Vega - Bootleg Boogie - e1751 - iStripper
Alissa Foxy - I Saw The Wolf - f1053 - iStripper XXX
Melody Marks - Melody In The Spring - e1743 - iStripper
Loren Sun - Delicate In Pastel - f1060 - iStripper XXX
Belka - School's Out - e1736 - iStripper
Ariana Van X - Ms. Naughty Maid - e1741 - iStripper
Mina Von D - Cuddle Mina - f1057 - iStripper XXX

Thanks @TheEmu. Wow, I wasn't aware 'allow:' was so exlusive. I've stopped using it henceforth unless
its absolutely required for a scene.

Also stopped using 'allow: pole' because for clips on random, iStripper was virtually excluding any other standing clips

Allow : pole should have excluded all other standing clips, not just virtually all. If you were seeing any then that is either a bug in the software or an incorrect clip level "tag".

https://www.istripper.com/forum/thread/29408/70?post=742892

• have reverted back to using native size 1920 x 1080 plain png textures

for mounting shaders. There was too much reduced quality in shader renders
when using smaller textures that had to be resized later anyway in da sprite
nodes, .. & quads tend to call too many clipsprite or clipnamesprite artifacts
unless there is at least one decent texture available to mount a shader on.

• Lately I've been using basic pos animation on the model & stage with expo

easing to let her linger closer to the camera. Useful too for those who like
glimpsing full leg overhangs. Also stopped using 'allow: pole' because for
clips on random, iStripper was virtually excluding any other standing clips

@WA thanks lots., nice clear uniforms syntax & effects with da CurtainMotion.fsh..👍

FG339-349
Here are another eleven WebGL shaders converted to OpenGL to run
&/or remix on iStripper's OpenGL platform. FG343 uses paired
clipsprites on an endless sprite zoom. FG345-349 cycle zooming in / out
of the model & stage. All scenes accomodate standing or sitting clips.

https://scenes.virtuastripper.net/ET_FractalGarden339-349.zip

zip size = 4.29 Mb .
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
https://www.istripper.com/forum/thread/27449/126?post=742893

because I still searching an alternative for my backup solution

In that case the only recommendation which i can give you is rsync,
because it is and it was my personal choice from the beginning and since late 2009.

https://rsync.samba.org/

It is also available as GUI-Application,

https://www.opbyte.it/grsync/

and here are some more interesting Links for you.

https://www.youtube.com/watch?v=n8IKEJUOISY

https://www.youtube.com/watch?v=oS5uH0mzMTg

https://www.youtube.com/watch?v=zQ6yba3Sl7k

Back In Time could be another good choice and it is using rsync and cp as Backend.

https://backintime.readthedocs.io/en/latest/

Another one for you could be Timeshift.

https://www.how2shout.com/linux/how-to-install-timeshift-on-ubuntu-22-04-20-04-lts/

https://www.youtube.com/watch?v=QE0lyWodWdU

It is available in Focal,

https://packages.ubuntu.com/focal/timeshift

and Jammy.

https://packages.ubuntu.com/jammy/timeshift

But that is everything what i can give you as recommendation and like i said
i never used anything else beside of rsync.

Even if you would use it on the Command Line only, the Syntax is not so complicated
like it looks in the beginning.

And once you got confirm with it, you can put all your Commands in a Textfile,
and save it as a Shell Script with a simple

#!/bin/bash

in the beginning, make it executable and you are good to go.

EDIT:

I was trying to find a simple and basic Tutorial about rsync, and i think i can't explain it
in a better way like this Guy.

https://www.youtube.com/watch?v=FZ9-_O9t814

And i have to agree with him about what he is saying on the end of the Video:
It is fast, efficient and useful.

@Stanston I didn't try on real hardware yet because I still searching an alternative for my backup solution before I can really switch.

@Sexy3DBoy oui mais c'est moins fun en plus j'ai la flegme de switch d'OS et enfin l'idée est de virer Windaube :)

Hi @Plopsaland, I know exactly what you mean. :-D LOL

Don't forget though that the mobile version is designed to play on a phone with a relatively small screen, not on a PC with a 4k monitor.

It really is inconsistent though, and if they're all 1080p then it seems there must be quite a bit of variance in the original video quality. Some "cards" on mobile look great; some cards more like the app output, and there doesn't seem to be any consistency as to whether they were 3K or 4K originally.

Or I badly need a new computer with a better graphics card for 4K video via the iStripper app. 😀

Yes.

Here is Friday!

And a sum up of our releases:

• Mina Von D / Flaming Chinese
• Melody Marks / Capture The Look
• The first show of Ayako Fuji take 2 “Cute As A Chrysanthemum”
• Kelly Collins / Ma Petite Robe Rouge
• Nata Ocean / Backless Black Dress
• Stefany Kyler / Fluffytime Pink
• Eve Sweet / Chicago Blues

And on mobile:

• Medusa in “Purple and white delight”
• Freya Mayer and her whip…
• Christy White all in delicacy

Last week to enjoy our Progressive redraw & Twenty Five

Here is a reminder of the rules and prizes :

Progressive Redraw:

The more booster packs you buy, the bigger discount you get!

Ranging from 20% to 56%, on top of your member status discount!

Click on the cards you want to keep then press "Draw again" to redraw the other cards.

• Level 20% and 24%: redraw will cost 1 credit.
• Level 28% and 32%: redraw will cost 2 credits.
• Level 36% and 40%: redraw will cost 3 credits.
• Level 44% and 48 %: redraw will cost 4 credits.
• Level 52% and 56% : redraw will cost 5 credits.

Once you have all the cards you want, press "Buy" to add them to your collection with the discount highlighted.


Twenty_Five :

Align 3 symbols vertically, horizontally or diagonally
and you win the corresponding prize:

• 3 jokers: you win a Joker Card
• 3 stars: you win a Special Event Card
• 3 devils: you win a Gift Card*
• 3 droplets: you win a free card
• 3 eggplants : you win 150 credits
• 3 hearts : you win 35 credits
• 3 peaches : you win 15 credits


Enjoy!

All of the shows on the mobile site are streamed 1080p mp4 video clips.

I suspect they are played with upscaling and anti- aliasing by your video card.

Oh right, thanks. 😳 😄 👍

https://m.istripper.com/

Umm, stupid question but how do you do mobile site on PC?

I just tried the mobile site on my PC with a 4K monitor, and the image quality for some cards is extraordinarily good- quite a bit better than the app can provide. They CERTAINLY do not look like 1080. Especially for the 3K shows- at least some of them- Gloria, Niemira, and Hillary C especially. Is this magic?

I am puzzled by this.

From the Discussion in here
https://www.istripper.com/forum/thread/27410/7?post=742680


a couple shadow scenes

https://virtuastripper.net/WA_Shadow.zip

images
https://virtuastripper.net/SceneImages/WA_Shadow.jpg

https://virtuastripper.net/SceneImages/WA_Shadow-2.png

@ComteDracula et @Socialhazard merci.
Les commentaires des membres sont très précieux pour progresser davantage dans ces scènes.

@ComteDracula & @Socialhazard thank you.
Members' feedback is very valuable to further progress with these scenes. 👌

Thanks @EverthangForever. Everything compiles well.

Like @Socialhazard I notice very slight jerks in the movement of the girls in the FG328 scene. Graphics processor used at 100% for this scene in my case.

Again a big thank you for your good work, and for sharing your creations with us. 😊


Merci @EverthangForever. Tout compile bien.

Comme @Socialhazard je constate de très légères saccades dans le mouvement des filles dans la scène FG328. Processeur graphique utilisé à 100% pour cette scène dans mon cas.

Encore un gros merci pour votre bon travail, et pour nous partager vos créations. 😊

@Socialhazard thanks...good to know 👌

FG328 has a tiny bit of model stutter with some cards. Otherwise everything compiles.

👍 😎

https://www.istripper.com/forum/thread/29408/70?post=742769

FG327-338
Here are another twelve WebGL shaders converted to OpenGL to run
&/or remix on iStripper's OpenGL platform. FG335 & FG336 use only
pole or cage clips. The rest use standing or floor work clips for
every scene.

https://scenes.virtuastripper.net/ET_FractalGarden327-338.zip

zip size = 180 Kb .
Extract the zip straight to ../scenes folder. Allow merged folders
and allow to overwrite any existing same name file.
https://www.istripper.com/forum/thread/27449/125?post=742770

Somehow I still look at this list :P

Congratulations @Cyelwin for joining full collection list!
+2676 shows in one month is quite the feat.
Time to ice down that clicking finger.😜 in jest.
Did you manage to get the Nice Shot - 500 in One Day Achievement Badge ?

Yes, her smile is irresistible (and all the rest) 💋

Hi!!!

Today our favorite Japanese model is back with the first show from her 2nd Take!😍
Her show "Cute As A Chrysanthemum" will make you feel like you're at the beach, you can almost hear waves crashing in the background!❤️



Whatever is going on in your world, you can count on Ayako to bring a smile to your face!😊

Enjoy💋

@pdlndr

Also you might like this:

https://www.istripper.com/forum/thread/50318/1?post=734767

Just yesterday I posted links to mp3 files in a different topic. For the record, here they are:http://democdn.desktopware.com/Musics/iStripperSong.mp3http://democdn.desktopware.com/Musics/VirtuaGirlSong.mp3

OMG I found it only now, super useful

The picture has been updated to May 2022.

Graphic says February 2022. I really don't need to relive the last 3 months.

If only we could go back and change something .... 💙 💛

Graphic says February 2022. I really don't need to relive the last 3 months.

This is the may 2022 iStripper’s Hall of Fame !

• Collection award Rewards the 3 members who have purchased the biggest number of shows during the month.
• Full Sets award Rewards the 3 members who have completed the biggest number of full sets of models' shows during the month.

These members get a decoration on their profile picture for one month! (Make sure you have a nice avatar picture on yours!)
You will also find here a ranking of the top 250 active members with the largest collections of shows. If there is equality between members, they are sorted from the oldest to the most recently registered.
Congratulations to all!

A strange video for me. The opening few minutes of tease are great and one of the best I've seen in IS VR. But the explicit scene was very lacklustre.

I still love the show though because the tease scene is so good.

We're very happy to announce the release of Loren Sun's VR 180 video!

Loren is a delight to watch at... she exhales so much sensuality and eroticism...
An absolute must-have for your collection of VR videos !

It's here: https://www.istripper.com/vr180/detail/a7d2240fe4cf42c9

Enjoy!

Si tu es doctorant et que ton sujet de thèse est basé sur: "comment faire tourner correctement iStripper Windows sur un Linux?", OK soit, tu vas en sortir 10000 pages et au final???

iStripper est écrit et compilé pour tourner sur un vrai Windows
OU
iStripper est écrit et compilé pour tourner sur un vrai Mac,

Tu installes Windows et Linux sur un SSD et tu swapes entre les deux au démarrage en fonction de ce que tu veux faire. Dès lors tu ne passeras plus ton temps les mains dans le cambouis juste pour des miss sur un bureau!!!
😉

Hi Breat44 :)

i hope it is ok to write in English, but i picked two important things from your Comment.

lors du 1er lancement d'iStripper, on ne voit pas les case pour se connecter, on ne voit QUE le bouton
Continuer donc ça cré un compte temporaire mais il suffit d'aller dans les paramètres du logiciel
pour changer de compte

là 2ème problème on ne voit pas la fenêtre de connexion (décidément) MAIS on voit la case du login
donc on rempli puis on utilise la touche TAB pour aller à la case mot de passe
puis on valide avec ENTRÉE et ça roule

Yes that is true and i always forgot about to mention that, shame on me ...

But it was different in my case because the first start of the iStripper Software was on my
real Hardware with PlayOnLinux instead of a Virtul Machine.

I also couldn't see the Login Window, instead i only could see the two Input Boxes for the
Username and Password. What i was doing (trial and error method), i wrote a single Letter
in the upper Input Box followed by pressing the Enter Key.

After that the whole Login Window was visible and i could continue with the Registration
for my Account. And as far as i can tell from my memory Viola should be visible in that Window,
but i'm not 100% sure any more.

Je dépoussière un peu mon sujet :)

Je viens de faire des tests sous Ubuntu Budgie en machine virtuelle VirtualBox en ayant le dossier models (le même que celui que j'utilise sur mon Windows sur un lecteur USB connecté à mon NAS et connecté via fstab sur ma VM.

Je précise que dans mon Ubuntu Budgie j'ai bien accès en lecture/écriture à ce dossier models.

1er test avec Lutris

• ça s'installe bien mais besoin de réinstaller à chaque lancement (j'ai du faire un truc de travers je pense) mais on s'en fou car il y a un gros problème qui est impossible de télécharger une carte car doit au dossier modèle UNIQUEMENT en lecture. donc idée abandonnée dans l'immédiat bien que cela semblait fluide.

2ème test avec PlayOnLinux

• dès après l'installation il y a un problème XD ça commence mal, mais en fait on s'en sort.

lors du 1er lancement d'iStripper, on ne voit pas les case pour se connecter, on ne voit QUE le bouton Continuer donc ça cré un compte temporaire mais il suffit d'aller dans les paramètres du logiciel pour changer de compte

là 2ème problème on ne voit pas la fenêtre de connexion (décidément) MAIS on voit la case du login donc on rempli puis on utilise la touche TAB pour aller à la case mot de passe puis on valide avec ENTRÉE et ça roule

• là l'affichage de la fille est très lent ça lag à mort et tout mais bon c'est une VM avec un GPU de 128mo donc normal en même temps
• accès au dossier models en lecture/écriture, youpi
• du coup test de télécharger une carte, RAS ça passe au poil

Donc à tester en installation en dur mais à priori ça marche au poil ou du moins pas trop mal avec cette 2ème solution, dommage ça fera 2 émulateurs de Windows d'installé mais bon tant que ça marche, car oui je garde Lutris pour mes vrais jeux :).

Pour ce qui est des lags, ça m'inquiète pas trop car j'ai fait tourné Final Fantasy XIV via Lutris en 1080p sans le moindre problème sous cette distrib .

Very nice. I have some of these already. Some of the girls I already have all their cards. The rest are more than worth having all their cards. Eve Sweet's recent card is excellent.