I'm 100% concentrated on them titties she's trying to cover up. :D

ok . Bonjour a tous :)
Offre intéressante je trouve ( Merci Totem ) . Même si pour l'instant je n'ai pas encore fait l'acquisition de toutes les cartes du 14/11 au 17/11 . Il me manque Genevieve Gandi-Summer Daze . Si le 18/11, les 3 cartes restantes sont magnifiques ( comme toutes les américaines que j'apprécie beaucoup pour ma part ) dans ce cas , je vous prendrai les 7 ( en partie pour bénéficier de l'offre ) encore merci Totem . continuer comme ça ;)

Would be happy to buy 7 cards if the most expensive one were free in fact I would buy 14 for 2 free cards but I don't want all 7 of this weeks cards so another sale that has nothing for me. It's getting pretty annoying .. I've been holding off refilling my credits and I guess I wont be buying any credits this week either.

Guys, we've had this discussion a few times before. You can go back and check the differences in colour of the Bonus photos and the clips, all the way back to the beginning.

Photos are ususally taken with flash photography. The clips are done with studio lighting which is normally much warmer in colour temperature.

Correcting a still image for colour temperature is FAR easier to do than a video clip.

The person who is editing the clips in post production may see colours slightly cooler than other people so may compensate towards the warmer end of the spectrum. There also could be a set point that the post production software uses to determine the average colour temperature of the clips.

THEN there is the issue with the blue-screen backgrounds. Changing a colour temperature can seriously degrade the image quality against these backgrounds. If one removes a shade of colour A, how will that affect colour B,C,D etc.,

From experience, I know that the first few cards from the Vegas studio were a little orangy. That was a studio problem with lighting and difficult to fix. Totem seem to have fixed most of these issues with the LA studio.

I guess we are always going to see human error with some cards and hopefully the Team can fix the errors. If not, I'm not going to lose any sleep over them. :)

Je ne risque pas de profiter de l'offre, depuis que qu'il y a des américaines (soi-disantes pour diversifier) j'ai de moins en moins envie d'acheter ces nouvelles cartes, je préfère largement les européennes qui sont beaucoup plus belles excepté Jillian Janson qui est l'un des seules américaines plutôt canon.

@kaiju and @frae

Can you please list the shows in question so we can be sure what we need to get?

I know it is available elsewhere if you know where to look etc. but to make it easy for the newcomers to find it...?

Thanks!

Absolutely. 10000% total agreement with mentorx on what he/she says.
Look at the last Uma Jolie card (e0574) : the difference between the the color tones in the photoset, perfect and natural, and the card's clips, that look frankly orange, makes you totally sure the weird impression you got from the demo clips comes neither from the model's health nor the lighting conditions, but from the cards prod.. and utterly wonder what's going on with the capture settings (!)

Select the girl in the carousel then you can see the release date at the bottom left.

OK, that may be a silly question but... where do I see release date of a given card? :) I can sort on it, but not sure where to find it. I'm pretty sure I know which cards are in the 7-card-set, but it would be nice if stuff like that would be easily searchable (including all weekend offers).

surely 3 more tomorrow Friday

I can only see 4 cards that were released this week?

Bonjour, de + en + c'est du n'importe quoi.Depuis que ça à changer en istripper y a + que le pognon qui compte c'est à dire faire raquer le + possible. en plus c'est une offre pourrie ou on a rien à gagner.

This week only if you buy the Seven shows released this week (Nov. 14 to Nov. 18) [...]

if someone buys other cards but in total seven cards then what ??

Then nothing.

is it essential to buy cards released only in this week ??
if someone buys other cards but in total seven cards then what ??

It means exactly what it says. "the most expensive". If your cards are all the same price you will be refunded the price of one card. It's pretty basic.

I am an old member and actually I buy all new cards for the same price 13.75 euros.
In only my case, What's means the most expensive?

turkce yazın

If you are a new member and you want to buy the seven cards, your 1st card will cost you more than the 6 others because with your first purchase you become a silver member and get a discount.
So you will be refunded of the most expensive one, the first one you buy :)

Good to know

I don't understand the cash back of the most expensive. All cards released this week are at the same price 13.75 euros for a triple diamonds as I am.
What can I win?

So this might be a silly question but i'm DD and all my cards are 15credits so tomorrow there is going to be a card more than 15? Because up to this point this week all are the same price.

Dear members,

This week only if you buy the Seven shows released this week (Nov. 14 to Nov. 18) we will immediately cash back to your account the credits spent on the most expensive one.

NOTE: Make sure the "Display tooltip" option is activated (DISPLAY section of your advanced settings) so that you get the cashback notification! It will also appear in your profile history!

• Special offer until Sunday, Nov. 20 - 11.59 pm GMT+1

Enjoy!

Released this week:

for the debugging:
under mac, you can open the console application, filter on 'vghd' and see the shader/opengl errors.

under windows (I didn't test it but it worth a try), maybe with powershell https://msdn.microsoft.com/en-us/powershell, and this on the vghd.log file: http://www.howtogeek.com/tips/how-to-get-tail-like-functionality-on-windows-with-powershell/

@DANO70
Glad you got it right ...Its the pos: (or size) of your shader rendered transparent sprite now that needs further adjustment..thats all.
Make it large enough and centered enough to allow the shader to render throughout the screen.
cheers ET :-)

Now that we have to rely on vghd.log for fault finding, it raises a few concerns I'm having about either my Geforce XTG 660ti Nvidia GPU card or bugs in the efficiency of the iStripper fullscreen platform.

I have the latest NVidia drivers & my rig seldom if ever crashes. I am generally happy with the performance overall. However the number of reported false starts and incorrectly identified or assigned node characteristics for animate: in the vghd.log gives me cause for concern. Could it be bugs in the programming of the platform I wonder:-/ ??

For instance: wrt to animation: cycle time, repeat mode, movement curve, property, amplitude

Ran some test scenes which I had thoroughly checked the .scn code for and cannot find syntax errors.
Inspite of this I often get the following errors reported:

fullscreen WARNING[Unknown curve "pingpong" for node ""]
fullscreen WARNING[Unknown curve "0" for node ""]
fullscreen WARNING[Unknown repeat mode "0" for node ""]
fullscreen WARNING[Unknown node property "source"]
fullscreen WARNING[Unknown node property "ambient"]

also I'm getting lots of:

vhd WARNING[WMVCore isn't available (Using FFmpeg as a fallback)...happening on every use
WARNING[libpng warning: iCCP: cHRM chunk does not match sRGB]
WARNING[libpng warning: iCCP: known incorrect sRGB profile]

Just wondering if others are getting similar reports in their vghd.logs ?
And does it matter ?

@E.T.

Thank you sir. The framebuffer sprite worked to ***** the shader back to normal but now it only displays the bottom quarter of the shader at the top of the screen. I'm tinkering with some positioning/hotspots/size to see what needs to be done. And I know about the close brackets from you teachers :).

@DANO70..speaking of 'dummies'..
Don't use the quad parameter..Instead use sprite
however you need to then provide a substrate
dummy transparent texture covering the area involved
to render the shader onto.

eg:

//to construct a shader substrate using framebuffers
texture {
id: Dummy
source: ETImages/Transparency.png //path to any transparent texture at or below the .scn file level in your PC
}
framebuffer {
id: DANO70isNODUMMYhehe
source: Dummy
shader: fragment,shaders/Sparkle.fsh
}

camera {
type : 3D
angle: 45
pos: 0, 0, 1080
target: 0, 0, 0

sprite {
source: DANO70isNODUMMYhehe
pos: 0, 0
hotspot: 0.5, 0.5
size: 1920, 1080
} // * //

@Emu mentioned somewhere that it is a peculiarity of iStripper player
that it renders some shaders upside down so we have to invert them using
framebuffers. btw..don't be scared of using shaders like sprites
when you have to...Just mount em on a trans surface in the 3D space
//* You can still nest their closing bracket around other things that you have going on
or add an enclosing quad below the camera code later 😊
Note, with framebuffers thus, you can chain them sequentially assigning ID's
and sourcing those into subsequent framebuffers when ever you need invert shaders.

Why isn't there enough income?

Nope, no new boys v3130914
Not likely to see any again either
.
.
.
Yep, more chocolate sure would be nice
I don't know though, 3Leg and Ironman........
Hot chocolate brownies with vanilla ice cream is friggin' awesome
;-)

Rest assured, they are diligently searching for asian, black, latin and other girls
Not getting a sudden flood of black girls doesn't mean they're not trying
.
.
.
Now, let's get back On Topic

@E.T./The Emu/ W.A. etc.

I have been trying to incorparate the new "sparkle" shader into a 3D camera setting scene and it flips the shader to run from the bottom of the screen up. I can't figure out how to make it run from the top down like the halloween scene. I've tried multiple rotation perimeters/scale/hot spot flipping to no avail. I think I need to use it in a framebuffer or something. I need you guys expert advice on this or if it's even possible to edit the shader itself to make it work. HELP a dummy out please :)

Here is the camera settings:

camera {
type : 3D
angle: 45
pos: 0, 0, 1080
target: 0, 0, 0

The shader setting:

quad {
size: 1920, 1080
shader: fragment,shaders/Sparkle.fsh

No new BOYS. I don't think Totem are going back there again. Not enough income.

hi, no more new boys?

I'm impatient to watch all these shows !

I have to say the past year or so the variety of body and outfit types has fallen way down.

Monika 100% concentrated on our photographer's explanations :) So cute!

3leg you might be proud but i'm also reminded about the recent words you said that still ring true....

"Istripper is vanilla as *****. It desperately needs more chocolate."

As far as accomplishments in my honest opinion they still have a long way to go.

Es wäre schön, wenn auch Deutsch angeboten würde, da mein Englisch miserabel ist.

Look up Gloria Sol, she only do solo stuff so no porn.
https://www.indexxx.com/models/124529/sophia-3/

Does anyone know her surname and/or if she does any porn work? She's one of the only girls I can't find off iStripper.

I found this one boob out from Chelsea French. And what a show. Long time not seen it.

So many famous pornstars. I remember a time when I used to think "Oh, she will never work for Totem, she's a top level pornstar, probably charges a fortune. Totem just sticks to unknown nude models from eastern Europe. It'll never happen..."
And now look at where we are. Just amazing. SO proud of what Totem has accomplished.

Thank you for 2.11.5. Starryk.
As always your work is much appreciated.

When do these new cards come out? Can't wait to get more of Uma.

good job guys lets keep it up.

Sybil is back? Niiiiiice

Very atractive girl, welcome.

Lovely girl. Welcome

Uma Jolie, Allie Haze, Monika Benz, Sybil

Darcie Dolce, Alessandra Jane, Adriana Chechik, Lily Adams.

Noisuf-X - Open Window

https://www.youtube.com/watch?v=lT5fRpkiZDs

Noisuf-X - Orgasm (PornStep Sexy Theme video HD)

https://www.youtube.com/watch?v=NLkR9eN9JH0