Thank you kindly, unfortunately that link didnt work straight away. However after I left the server I was able to join again with the link. Thank you for your time :)

Yes. Under 60% in Registry will reset the Small size.
For those who don't know how to make bigger models than 60% in the Small size, I post again these screenshots that are not mine:

EDIT by MOD:
the 1st Photo is Correct, The 2nd Photo is WRONG.
I have added the Corrected Information.

It is NOT expectedLargeHeightPercent
the Correct Registry Value is

expectedHeightPercent

@Nsanity Hi, please try : https://discord.gg/hPQgggkzsb

Hello All, hope your well. Apologies if this is the incorrect forum to post this. But I suddenly dont have access to discord, this worked fine a while ago, but I checked today, and unfortunately nothing. Any assistance would be appreciated. Thank you

80 to 90 works fine for most cards ..
Only if you use new and old cards like 720 and 3k together there will be a size difference in some occassions..
just try .. not working for you .. set the settings to there default ..
In most cases when you go below 60 % it will reset when you close and restart iStripper if I'm correct...

You'll find that members who've been here longer & with fuller collections, are quite satisfied(for the most part)!

The number of members who express any opinion on this matter is far too small for us to know whether or not the members "for the most part" are quite satisfed or are disatisfied.

@LezzyLover

Or use the Invitation Link which you can find on the bottom of the Website under the Keep connected Section.

https://discord.gg/3ssN3utTks

Furthermore if you still have trouble, please send a PM through the iStripper Client
to @Wyldanimal he will help you to get verified.

Please use also your iStripper Username on Discord as well.

@facebeater
NO. Besides the fact that you're way too new here to appreciate the full & glorious magnitude of iStripper! You'll find that members who've been here longer & with fuller collections, are quite satisfied(for the most part)! ✌💚😎

I never understood why we cannot have both at the same time, because I like both.

👍 😎

There are so many sites that offer masturbation scenes. But a hot erotic show with good strip tease and pole dancing is hard to find nowadays.

I never understood why we cannot have both at the same time, because I like both.

So, I would say the standard of model has not really changed - just the change in fashion in an attempt to provide something new - which often fails with me more often now than it once did.

Old dog, new tricks. ;)

have you guys noticed brazzers, bang, bffs and other pages?

I care not what happens elsewhere.

@LezzyLover69

I never received a message from the bot, although I joined before it was implemented. I no longer have access to the Discord.

If you have no access at all, I don't know how to help you. But if you have extremely limited access, where you can't see most of the channels, here is what worked for me: go to Discord, right-click on the iStripper icon on the left bar, and click Leave Server. Then come back here and click on the "We're Moving to Discord" announcement banner on the front page of the Forum.

That should take you to an invite page, where you can enter your information and the Bot should present you with a Captcha. If you do the Captcha and get a green check, but below it tells you that the verification failed, check and see if you have access anyway. It did that to me and it was lying.

How to Fit More than 2 small size clips Above 60%

set the slide to 1 Girl
reduce small size to under 60% -->try 20%
Increase the Girl count.
When all Girls are on the screen
Increase the Small Size back to it's Higher setting. ---> 60% or more.


The undesired effect is, that the Models will be Overlapping or Bunched together.
This was the MAIN reason that by Design, small size was limited to 60% or Less.

I read that the iStripper application can give errors at Small size over 60% for some users, so I will not insist on this request.

I have never experienced an Error from Small Size over 60%
While small Size at 100%, some models are too tall for the screen
So I usually have it 75% or 85%

the App is 32bit, and can only effectively use 3.5GB of Memory.
Each Girl on the screen ( no Matter the Size ) has to be fully expanded in Memory as it is played.

10 girls at 3K size was not a problem for 3.5GB of Memory.

But now with 4K size Clips.
10 Girls will exceed the 3.5GB and cause a crash.

Most of the time, I can run 5 to 6 4K cards
when I push it to more than 7, then there eventually will be Memory problems, and a crash.

a Single 4K clip can take up 500K or 600K or more of Memory while it is playing.
Most 4K clips are in the 300K to 400Krange.

But Multiply that x 10 and you are Out of Memory and a crash.

Eventually, the iStipper app will be released as a 64bit app
and there will not be a 3.5GB memory limit.

I never received a message from the bot, although I joined before it was implemented. I no longer have access to the Discord.

@Wyldanimal
I did in Registry from 60 to 80. Now I can do the Small Size at 100% and the Full size 200%.
I read that the iStripper application can give errors at Small size over 60% for some users, so I will not insist on this request.
Until now I've met no errors.
Thanks!

Try this.

https://www.istripper.com/forum/thread/45445/1?post=675322

Is there any way to activate a dark mode?

I've experimented with the Discord Widget List.
It is a Live Member list (slight delay ) with each refresh of the Frame.
It include 100 member names
But the Criteria for Which of the members are added to the List,
Has not yet been detected.

It Does use the Server Nickname as the displayed Name on the List.
So members with and without a Nickname are displayed.

It also seems that if your Name is on the List,
It will always be one of the Names Listed, based on your Status.

It seems to use a Pattern Matching algorithm
when you watch the List,
The List is in an Ascending order.
there are patterns Such as Show 3 that match 'Disc'
or Show 2 that match 'Pick'
2 that match 'za'

from what I can discern:
It is Picked from the members currently on-line
the List of members that match the established Patterns
then Sort the List in Ascending order

can i change my username for discord?

iStripper asks you to use same name here on Discord.

Added by MOD:
If your Discord Name is different from your iStripper name
You can create a Server NickName
and that should be the same as your iStripper Forum name.
Read the FAQ on Discord.

when is the last day for this forum?

Missed this perhaps?
https://www.istripper.com/forum/thread/48572/1?post=726093

can i change my username for discord?

when is the last day for this forum?

I have seen my name in the Discord list here, but not at the moment so it's not realtime.
----
Not far off though - on the list now.

@pickle1
Yes, that was my suspicion too - it is just a snapshot.
Thanks for your response.
Regards ...

No, I'm not in and never was, even when I'm on for the whole day.

It does 'cos I'm in it 😊 - it just doesn't highlight roles

That list here in the forum also never shows, trusted members, beta testers or mods.

I suspect that that is not a real-time display but is a snapshot.

It says there are 542 members online but that list does not look to be more than 100 and if you go into Discord right now the Verified member list shows 276 members online (and you are in that list).

I am currently connected to Discord.
I have just closed and re-started the iStripper GUI.
Why does my name not appear at the top of the iStripper forum in the list of members connected to discord?

@EverThangForever, @WyldAnimal
It is some time since I uploaded any scenes to this forum, and I have forgotten how to do it!
Can you plase remind me?

I have two compressed files 1) DrD_CruiseShip2.rar 246,045 kB OR 2) DrD_Cruiseship2.zip at 247,020 kB.
Are they too big? Is the naming convention OK? would you rather I used Discord? (If so, how?!). They both include PhotoShop Elements .psd files which are not strictly speaking part of the scene, but were used in creating the image and masks.

I wanted to upload the scene because it contains features other members might find useful - e.g @TheEmu 's permanent name technique, and realistic shadow technique, as well as one or two tips on using PhotoShop Elements to create masks which blend into the scene without quivering edge-effects.

Regards, ...

Thanks.
I have found what I needed (the member list) on the fron page of the Forum.
Silly of me - it was hiding in plain sight!

Greetings @JinHui and isn't Nici great. 😎

@DrDoom9
Si vous voulez voir les publications d'un membre, cliquer sur son avatar et ensuite sur posts dans la fenêtre ouverte 😉
If you want to see a member's posts, click on their avatar and then on posts in the open window 😉

Is this possible?
I would like to find a particular member's fullscreen.

Scarlett Jones
Fresh Ginger Ale
e1678 - iStripper

WOW looking forward to this card.
Love the outfit and the contents

I don't know, but the rather long minimum time between shooting a card and its release sort of indicates that there is a lot of human work involved - it might be very expensive if you want Totem to do this for you.

The post-production and the Q&A reviewing take time, and remember that the team is small to do that.

@JinHui Hello and Welcome ! 😉

Hello, welcome to istripper @JinHui 😎

Hello

@wisc4fun
I can't find you on the iStripper Discord Server
Have you Set your Nickname up to the same as your iStripper name?
Per the FAQ o n Discord
https://discord.com/channels/709339443777110026/875301513977794591/884455807855513610

New app for devious and fetish which you can link to istripper only from this app to istripper not the other way around so you can feature more explicit and more fetish for everyone + casual shows without changing the segmentation of istripper.

Main reason is that istripper kind of always stop at foreplay for a lot of people it feels like

But for example, how easy would it be to feature gloryholes?

You can use this Method to Get Small Size Larger than 60%
https://www.istripper.com/forum/thread/40105/1?post=589739

I also Have a Registry File you Can Download to your Desktop or a Folder of your Choice
Quit iStripper
Just Double Click on the File to Update the Registry.
reStart iStrippe

You Will have to acknowledge a Security pop up to Allow it.

http://wyldanimal.com/QATools/SmallSize100.reg

This is the file if you want to create it with a text Editor

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Totem\vghd\player]
"expectedHeightPercent"=dword:00000064

Make sure to save it with the extension .reg

Good user interface design lets the users decide what they want and warns of negative side effects. Good UI design also provides robust undo feature for when the user makes a serious mistake.

Re: Girls walking off screen

In my experience on a Mac this generally results in the clip and card terminating early as the model drops through the floor.

@TheEmu That's true. I had to mess with the settings to make 480p look ok but without an old monitor only so much you can do I think.

Even with two girls on the screen at 100% they will either spend a lot of time overlapping or, if you have manualy repositioned them, then they will spend a lot of time off screen.

Personally I am all for allowing the users to do this sort of thing, but I can also understand Totem's apparent reluctance to allow it. On the whole I think it should be allowed with a warning appearing when you first adjust the settings in a way that can have what many would think leads to a poorer overall impression of the product - e.g. times when the two girls have walked off screen and there is just an empty screen.

@Socialhazard - the same thing will happen. It is due to having to stretch the clips to be larger than their original sizes.

Even with small size set to 60% you can see the blurring for the very low resolution, 480p, VirtuaGirl classic cards unless you tick the "don't zoom over 100%" option (though those cards are always rather blurry anyway).

I'm thinking only at 2 girls on the screen, from 3 onwards it is crowded.
For 10 girls on the screen at 60% size, there are too many.
If someone wants to crash his gameplay, he can set maximum graphics for the newest games on their lower pc. Anyone who wants to not crash their iStripper application would do well to not put the size 100% for ten women on the screen simultaneously, if the analysis power is too high.
Anyway, all plus features are welcome! It is an idea with the support of the votes

Bugs, ideas, suggestions are all there. Bit like moving to a new house with snags, still a few things to sort, but it is developing. A couple more categories perhaps? Up to all of us to help it work even if it is just starting a thread devoted to your favourite model.

Quick question for anyone that did the registry trick. Is the small size over 60% blurred at all? Over 100% full size seems less sharp at 1080p so was wondering if the same thing happens in small size. I have full size set at 95% and don't zoom over 100% box ticked even though this only affects some older cards for me.

I think the origin of the limitation lies in the algorithm used for positioning the clips in small mode.

If you have a large number active clips, the maximum allowed being 10, then they tend to all bunch up towards the middle of the screen with this tendancy increasing as the size increases. This is probably done to stop the models spending much of their time off the side of the screen. If you had any number of 100% sized clips active at once they would all be centered in the same place right in the middle of the screen. The arbitrary limit to 60% does stop the bunching becoming too ridiculous - though it is still annoying..