I cannot access the cards I have bought...when I click on one I keep getting the download iStripper button. Mu account is open but I cannot get the cards to play . Anyone help ?

I have noticed, and greatly appreciated, that there is now a new category of clips, "Glass". When a couple of us suggested this sort of clip quite some time ago Totem replied that there might be some difficulties with the way the glass screen, and smears or water on it, would interact with the blue screen process. I congratulate Totem for exploring the possibility of prodcing these clips, and more so for overcomming any difficulties that they encountered. I really like those that I have seen so far. I assume that at some point it will be possible to explicitly select or exclude these clips using Allow: or Deny: clauses in Clip nodes in .scn file, and am looking forward to seeing some "window cleaner" scenes. There are a few older clips featuring girls in French Maid costumes where they use a feather duster to appear to clean the computer screen and these could possibly be classified as "Glass" clips even though no glass screen was used when producing them.

I have also noticed that no Cage clips have been produced for a long time now. Although I personaly find these to be somewhat "heavy" for use on the dektop I also find them absolutely invaluable when producing certain types of fullscreen scenes as they are the only was to prevent the performers wandering away from their allotted place in the scene. I do hope that Totem will resume production of the occassional cage clip.

There are now two distinctly different types of InOut clips. The old kind had the performer simply walked on stage at the start, or off at the end, of the performance but the actual performance was done centre stage. There is now another kind where the performance is itself done at the edge of the screen. I like both, but unfortunatly a scene written with one kind of inout clip in mind will not normally work well with inout clips of the other kind. Just as there are two types of Table clips selectable using Table, Fronttable and BehindTable specifiers in Allow: and Deny: clauses it would be greatly appreciated is the InOut specifier could be augmented with InOutCenter and InOutEdge specifiers.

EDIT: When I submitted this post I noticed that it it showed up as having been posted "in a few seconds" - should this not have been "a few seconds ago"?

Hi! Who is the girl in skin on the halloween theme?

Giving refunds isn't something they normally do
You would have to contact customer service to ask about it though

Yes sir can't forget the classics that brought alot of us here. There is alot of really old 720p that where converted over from 480p. I play alot of those still. Morgane, Jana H, Jennie Gregg, Axelle Parker, Alizee (no longer for sale), Adriana M, Vicki S and many more. Jezz I'm getting old lol. I only have a few of the original 480p cards after they brought them back from when they weren't supported for a while. Sadly Dorina, Vicki S, Sandy, and Emily are the only ones I have now. Man the flashback of memories here thanks for shareing a old school type thread. I have some old cards to play now have a nice day :)

@EverthangForever

You will find them them in the vghd/bin folder.

Another bug I have reported twice (and also by @HombreSinSombra) that has been completely ignored.

http://www.istripper.com/forum#/forum/thread/34384/last#post512906

@EverthangForever
no, I don't think that it's an issue of Win10 cause i'm not using it.
but I saw that the effect already starts on mouseover in the preview window.

Thanks for the background info guys. Looks like it was excellent foresight to include these two backgrounds.

I never really liked these backgrounds before and generally avoided them. I don't really like them for viewing the more recent cards.. For higher quality cards, I prefer the more conventional location themed backgrounds. But I now realise that these two particular backgrounds add great value to the application. Last night I set Full Screen to play on,y 480 Classic cards on these two backgrounds and really enjoyed it. It's like watching 90's girls on a 60's background. It's basically a much more exciting version of the 'Groove is in the Heart' music video. Quite appealing to me.

The older classic cards aren't so suitable if the objective is pure arousel. But they are great for watching some pretty girls strip and dance to a beer, especially as the the girls often dance quite well in these cards. I also love the variety of the costumes. It encourages me to consider investing more in these cards.

I'm not happy with a card I purchased, Leyla Black/Spanish Nurse. Is there any way I can get a refund?

Thanks at IStripper Team, great work, the updates makes everytime better this software :)

Yep. Dano is correct. For that reason, I added @lezardo's antialias shader to all my scenes. Makes everything smoother including older cards :)

Using iSsoftware I downloaded a picture from one of the forum threads which showed as received on the download console.
However I could not subsequently find the file in my downloads folder or anywhere else on my PC ...?
Had to go to web forum and repeat the process..then it downloaded, and I found it as per usual in my downloads folder. Very strange..
don't know where the others went :-/

After clicking on a card in "My Collection" it is now only possible to start a show from the details panel (by clicking on the play button on the card shown there). It is no longer possible to start the show when one of the comments, photos, clip list etc. panels are open. Can you please add a "Play" button to the set of icons at the top of each of these panels.

@EverthangForever
Thanks for the tip about the line spacings in Halloween.scn.
I changed them, but it is still like watching TV in the Lake District in the 1950s.
I will look into the GPU driver version tomorrow. Maybe it's just Windows 10 Anniversary Issue - I have had lots of niggly troubles with that.

If memory serves me, those 2 scenes were designed to actualy denoise and antialias (soften the edges) of the older cards so they look better. Newer cards though they tend to make the image sharpness slightly decrease. But yeah I like how they make old cards better too ;)

I agree. I would like this option for my collection too.

On a side note, this thread is probably better suited to the Ideas section.

I've just found that I really like watching the old Classic 480 cards on the 'Perforations' and 'Shadowblob' backgrounds on Full Screen mode. The lower quality of these cards gives a retro feel on these backgrounds and actually enhances the experience of viewing these cards, even on larger sizes. In fact, I now prefer the older classic cards to the higher definition ones on these backgrounds.

This pleases me. It greatly adds to the value of these classic cards, as far as I'm concerned.

Of course, I recognise this is a personal opinion that may not be shared by others. But I thought the observation was interesting.

This post is genuine. It is not intended to be ironic or sarcastic.

j'ai mis a jour mes pilotes graphiques ce jour mais le problème persiste si vous avez des idées pour remédier au problème je suis preneur tous mes autres écran de veille fonctionnent correctement

@Dr.Doom, thanks yes we hope with fingers crossed..

I found some line spacing issues in Halloween.scn which I received when installing iStripper 1.2.136
I don't know whether its significant at all, but try this..in your Notepad++

Line 96 color: 0.9,0.7,0.5 change to color: 0.9, 0.7, 0.5

Line 109 source: fboNormal,0 change to source: fboNormal, 0

Line 125 ambient: 0.8,0.5,0.2 change to ambient: 0.8, 0.5, 0.2

It could be the drivers for your GPU Window version are not new...Are they updated ?

@HSS, thanks a lot, The sync fault red has gone on my rig, and avatars look back to normal now.😊

@TheEmu et @EverthangForever
Thanks for your contributions.
I didn't know Totem might be going to address this issue. Even though iStripper is improving (I have to admit it!), goodness knows when they will get round to updating fullscreen so it accommodates large numbers of scenes. Even then one wonders if they are capable of doing it right first time.
As an aside ... the new Halloween2016 fullscreen doesn't work with my NVIDIA GPU; there is an enormous amount of interference, and I have had to comment out most of the shaders.
As another aside ... the Halloween skin is also out of date, in the same way as @WyldAnimal's Tutorial is, because Totem have change the GUI in the most recent 2 versions, and the no. of pixels at the top is different to that which it was when WA wrote his tutorial.
So I have little or no faith in Totem doing things right first - or even second - time.

@EverthangForever. I too am holding off changing anything until either a version of the software that better supports large collections of scenes is available or Totem announce that there will be no change in this area. As they previously have said that they intend to improve this aspect of the program I expect that they will do so, but just when this will be available I have no way of knowing. I certainly do not want to rename everything and update the descriptive text files and then have to do it again when scene heirarchies are supported, whether they be as name trees or otherwise. i am quite happy to do it once, but not twice.

my post should read 'there is no reason NOT to....'

@DrDoom et @TheEmu. thanks, I've had a good think about this..I downloaded BRU, however I will not be using it personally yet. I still need the original file name in front of me in file manager to make sense of what each scene is about and i am waaay to lazy to use a cross reference sheet every time I use the program. @DrD, The need for neatness doesn't quite trade off enough for me either at this stage. Future updates instead of copying over existing unimproved scenes as they currently do, will most likely create too many ***** redundant similar looking files on peoples computers. If we get full Name-tree listings back, and can group them like before, or even if we just get a mouse-over display of full name, maybe then is the time I can use it to prefix new names to scenes.

I have to agree with ET here. Just randomly flicking thru the other carousels, most of the girls are bare-legged. New, old or whatever cards in between seem to produce the same results more or less.

Here's a cap of the current 'blondes' one. Only 2 girls have their legs covered by anything in this week's carousel...

Edit: I forgot the Jenni Gregg giant in this one ;)

@Number6

I was just lucky with the empty bar, I think because of the time of day that I was there. I did have to use GIMP to remove a couple of bar staff that were visible through the open door behind the bar, and for the scene looking out through the pub window I had to erase someone in the street, but that was all for the pub scenes. I agree with your assessment of the place - it's still a proper pub which has excellent beer, which it treats properly. It also has proper pub food rather than fancy gastro-pub stuff.

For bulk file renaming I use a utility called BRU - Bulk Rename Utility. It provides an easy to use graphical interface to make all sorts of systematic renaming of large groups of files quite easy to acheive. The website for it is http://www.bulkrenameutility.co.uk

Humm, my opinion is that using a carousel as an example of what is typical is inverted logic.
surely a carosel represents what a triple diamond member has NOT bought. So how is this a
way of example'. ~ Sorry but this all sounds a tad biased to me.:-/

I thought that first one was from 'Coronation Street.'
I guess Birmingham, Liverpool, Manchester and even London were not that different in the old days :)

Lovely stuff as always, Emu :)

Btw @ET: If you missed it the other day, there were over 2000 avatars deleted by accident by the team and some of us had/have to re-upload our avatars. I did mine within 2 hours fortunately. Many may have missed the heads-up :/

@No.6: There was a 'Bottle and Glass' pub not far from where I used to live, oop north. Renowned for it's wonderful pub grub, it was always heaving too :)

I know @Number6 and I were barking about this when iStripper first arose. Somewhere along the line there was mention that Totem may re-introduce the name -tree listing once things have settled with the new versions. I admire your endeavours to provide a cross reference listing using the available 35 characters in the displayed name.
If your outcome suits your purposes I think Notepad++ may be capable of doing batch file renames so others can have a go at following suit..@WA may know more about incremental batch file renaming for free. anyhow great idea. Goodluck with it. 😊

@TheEmu

Great stuff as usual.

How did you manage to get the shot of the empty bar?

Every time I've been in the Bottle & Glass Inn it has been heaving. Great pub though - no juke boxes, fruit machines, etc. and best of all hand pulled Bathams beer :-)

@EverthangForever
Thanks for your response.
As TheEmu found, in VG one could precede a name with the "+" sign, and this would indicate that the scene was part of a group.
This doesn't seem to work anymore. If it does I would appreciate being made aware of it.
So, for instance, in TheEmu's "Houses" fullscreens, there are over 90 similar scenes. The titles are now too long so I am putting a little tedious work into renaming the scenes to the format "Houses - A1" and putting the title and house description into a text file.
e.g. I have created a Data/scenes/Houses/text directory which contains a file named Title_Attribution_A0.txt which contains:
Oh Dear! The iS server will not let me post the code. It is very simple though, I'm sure you can guess it from the picture.
Then I rename TheEmu's .scn file from his original long name and change the text: line to refer to the text/Title_Attribution_A0.txt file
It looks like this (if I can use the Picture Manager properly this first time!):

Obviously this is quite tedious and lengthy, but at least it gives a full title, desctiption and attribution to the fulscreen images.
But, it does not save any space in the GUI screen!

I wish there was @DrD..WE never could sort to folders before in VGHD Player .scn listings. It was always Name - tree sorted. like Smith> john. The limitation was/is that you cannot play a scene file more than one folder level down from your computer's Data/Scenes/.... directory.
Additionally you cannot write a path to anything in the scene file code from a folder above where the scene .scn file is located. This can ***** an author to have to duplicate commonly used textures or shaders into several locations. & hence I expect install-zips for updates will get large, unless authors structure installation of their folders into user subdirectories of data/Scenes/..
Thanks to Zebrazuk's early example, most have done that. The unfortunate upshot is, we cannot share or pool each others original files so easily if at all. I don't know if that is good or bad. If it was a huge array of media available, it would seem more & more inefficient not to pool large often used textures or shader modifications. etc.

Out of curiosity, what does "Upgrade the card's page" mean?

Is there any way to properly apply a directory hierarchy to the fullscreen user interface on iStripper?
I have over 500 fullscreens, and I would like to split them into categories.

There is no reason to have the best of both worlds, okay so some people want to see bare feet. Surely the anticipation involved in the model peeling off the shoes and stockings (damn sexy in my view when they start off dressed and do that) just adds to the experience? There are more than enough clips per card to achieve this.

I agree entirely.
High Heels, Stockings, Belts and Basques are icing on the cake, and I have a sweet tooth.

@The3LeggedMan you mean like a clone army 😊

Many thanks to the Team ! This new version becomes better and better at every release. I do not know exactly when it was fixed but many thanks to have fixed the problem with interface display on 1024x768 screens when some theme is activated, so that I can enjoy this Halloween theme :-)

BTW the Halloween fullscreen scene also works like a charm on my small AMD Radeon HD 6670, great job from the Team to demonstrate how powerfull their rendering engine can be.

Another full package of this kind for Chistmas will be warmly welcomed ;-) ;-) ;-)

Uhmm......
These girls are somehow of higher quality than some recent releases ?
Hotter, in some way ??
I'm not seeing it

"not validated, presumably because of ignorance of voters" ???
You should know that the voting is taken into consideration but it doesn't decide........Totem decides
The voting was actually quite favorable for Antonia. They just chose not to cast her.

LOL
"Sample" ?
Is that a taste test sample ?
Can I get a lick ??

Well, here's one very good clue that Angie is back again
;-)

https://www.istripper.com/forum#/forum/thread/34244/1

Looks like Angie Line is making a comeback.

What? How do you know, i love Angie Line, really hope this is true

@Virt4B I have an old GTX 660Ti on Win7 and am having no problems running Halloween.
In fact Nici looks absolutely gorgeous in those Tyndall Effect rays, so I'm already playing with the new shaders elsewhere..there is no breakup throughout. I guess it is an upgrade driver issue for Win10. :-/

Add me also to the it doesn't work for me list - new scene looks exactly like the image from @dodgecharge

GTX 560 TI - latest drivers

It probably is driver bugs, it's always worth checking if there are any newer available from the manufacturer rather than relying on the crud offered by Windows Update. Why? Because the drivers Windows Update offers are generic and not necessarily optimised for your particular hardware. So if you have a PC built by DELL, HP, Lenovo or A N Other then check their site first. If you built it yourself or an independent PC Builder made your PC then head to ASUS, Gigabyte or whichever branded part your system uses.

The exception here being Intel integrated Graphics for 1st generation Core processors onwards or AMD APU Graphics. How you can tell what you have if not sure is look in device manager at the processor name (or download a third-party tool like Speccy) and Google it. Also, check the display adaptor entry and do the same.

Notebook - Intel i3-3110m with Intel HD 4000 GPU and W8.1 Update 1 plays the scene perfectly. The drivers are from Fujitsu, a release behind Intel's own offering
Desktop - ASUS STRIX NVIDIA GTX960 (STRIX-GTX960-DC2OC-2GD5) using ASUS build of nVIDIA Display Driver 353.62WHQL for W8.1 Update 1 also works fine. Again, not the latest driver. I tried them but the system BSOD on me in the middle of an online multiplayer game I play frequently so I've reverted back and it's been fine since.

With respect to the problems reported by some users with the Halloween scene.

My laptop has two GPUs, an Intel Internal Graphics Uinit, HD Graphics 4000, and anNVIDIA GeForce 630M. Both of these display the Halloween scene properly. However, in the past I have had a few shaders that would work with one but not the other.

In most cases the differences could be traced to differences in the way that the GPUs handled floating point NaNs or differences in the way in which some standard shader functions handled invalid (out of range) arguments. I was able to fix almost all of these by finding which line in the shader sources was causing the problem and recoding to avoid it. I have had a very quick look at the shaders used by the Halloween scene but can find no obvious place that looks as if it might be the source of the problem.

When I first upgraded to Windows 10 I also had a few problems when using the NVIDIA GPU with shaders that had previously worked perfectly under Windows 7. In some cases the problem looked very much like the picture posted by @dodgecharge. However, a few days later I updated the NVIDIA driver and have had no problems since.

Based on this experience it is possible, but not certain, that the problem seen by dodgecharge and others may be fixed by updating their graphics driver.

Looks like Angie Line is making a comeback.

for me the new scene looks like the image @dodgecharge reported.
As i don't use the scenes its not a big deal for me though i wonder if the same thing is responsible for not shows the slider bars - the problem that Totem team consequently ignores for months now.

I do not understand the logic behind using this term to describe your unique iStripper experience...I mean in this situation "crystal clear" is going to depend on your graphics card/monitor resolution...not the card itself...

My monitor resolution is 1080p and I've downloaded in both 1080p and 3K...not a single difference in quality...only size...so yeah it makes absolutely no cents to me...it seems that the cards are simply being categorized based on the recording process...nothing more/nothing less...

If anything those squeaky clean screen clips definitely do the trick! :D

Thank you. I've had < 20% success modifying WebGL shaders so any script // commenting you've done with regard to .fsh changes will be interesting. We are a bit stuck without the old VGHDPlayer debug screen now. Grateful for all this amazing new work 😊

Well you know the old saying... Once you've Czeched one out, you've Czeched them all out.