Age Verification
This website contains age-restricted material including nudity and explicit content. By entering, you confirm being at least 18 years old or the age of majority in the jurisdiction you are accessing the website from.
I am 18+ or older - Enter
I am under 18 - Exit
Our parental controls page explains how you can easily block access to this site.

最后发帖 - 页数 1758

  论坛

rhufus
已加入 在 Feb 2009
470 发布

Transfer

关于iStripper的一切
June 23, 2015, 40 回复
Even if the 4th power applied that wouldn't work for a binary conversion. 1024kb applies at MB level only. All other multiples are per 1000.

I'm not a math wiz, but unless it takes 1024b to make 1kb, 1024kb to make 1mb, a 1024 mb to make1gb, and a 1024 gb to make 1tb (which it doesn't), then you can't use 1024 to the 4th power for that conversion (which is what Seagate did).


phisics.nist.govExamples and comparisons with SI prefixesone kibibit 1 Kibit = 210 bit = 1024 bitone kilobit 1 kbit = 103 bit = 1000 bitone mebibyte 1 MiB = 220 B = 1 048 576 Bone megabyte 1 MB = 106 B = 1 000 000 Bone gibibyte 1 GiB = 230 B = 1 073 741 824 Bone gigabyte 1 GB = 109 B = 1 000 000 000 B

Historical context*
Once upon a time, computer professionals noticed that 210 was very nearly equal to 1000 and started using the SI prefix "kilo" to mean 1024. That worked well enough for a decade or two because everybody who talked kilobytes knew that the term implied 1024 bytes. But, almost overnight a much more numerous "everybody" bought computers, and the trade computer professionals needed to talk to physicists and engineers and even to ordinary people, most of whom know that a kilometer is 1000 meters and a kilogram is 1000 grams.Then data storage for gigabytes, and even terabytes, became practical, and the storage devices were not constructed on binary trees, which meant that, for many practical purposes, binary arithmetic was less convenient than decimal arithmetic. The result is that today "everybody" does not "know" what a megabyte is. When discussing computer memory, most manufacturers use megabyte to mean 220 = 1 048 576 bytes, but the manufacturers of computer storage devices usually use the term to mean 1 000 000 bytes. Some designers of local area networks have used megabit per second to mean 1 048 576 bit/s, but all telecommunications engineers use it to mean 106 bit/s. And if two definitions of the megabyte are not enough, a third megabyte of 1 024 000 bytes is the megabyte used to format the familiar 90 mm (3 1/2 inch), "1.44 MB" diskette. The ***** is real, as is the potential for incompatibility in standards and in implemented systems.Faced with this reality, the IEEE Standards Board decided that IEEE standards will use the conventional, internationally adopted, definitions of the SI prefixes. Mega will mean 1 000 000, except that the base-two definition may be used (if such usage is explicitly pointed out on a case-by-case basis) until such time that prefixes for binary multiples are adopted by an appropriate standards body.
HombreSinSombra
已加入 在 Oct 2010
6382 发布

Transfer

关于iStripper的一切
June 22, 2015, 40 回复
Hahahaha! @Worzel.

Ok, a basic maths lesson using, erm, bases :)
Our normal system of counting uses base 10. This uses the numbers 1 thru 9 and the cypher, 0. So we have
0,1,2,3,4,5,6,7,8,9. Our brains can handle this fairly easily. We are all taught this decimal system from an early age :)

Now, imagine other number systems that use less or more digits. Eg, Base 8 uses only the numbers, 1 to 7 and the cypher, 0.
In normal base 10, each digit going from right to left is multiplying by 10, skipping the first digit.. So when you see, 1,000 you are really seeing 10 x 10 x 10. The first position on the right could be a number up to 9. Add one more and then we have 10. This means that we now have one group of ten and no smaller numbers. Now, add 7 to this and we have 17. One group of ten plus 7 little ones. Let's add some more. 1024. This number means 10 x 10 x 10 plus 2 x 10 plus 4.

Ok. Now for the trickier stuff. Hexadecimal is base 16. This uses all of the digits, 0 thru 9 plus the letters, A,B,C,D,E,F. Why does it exist? Because computers can work much faster using this counting system as opposed to our standard base 10. Why is that? Well, because computers work using electronics and only know two states. ON and OFF. There is a current passing thru a memory node or not. Just like a lightswitch :) Base 16 or Hexadecimal works on multiples of 2. (This still means ON or OFF).

Now we come to base 2 or binary. Hexadecimal is just a multiple of 2. ie: 2 x 2 x 2 x 2 = 16.
Base 2 only uses the number 1 and the cypher, 0. This is equivalent to being ON or OFF. Each point in a computer's memory is either ON or OFF at any given time. ALL computers use this binary system and all of the points stored in their memories are either ON or OFF.

So, for computers to work, they have to count in binary or base 2 maths. That's why 1 Terabyte = 2x2x2x2x2x2x2x2x2x2, etc. = 1,099,511,627,776 Bytes:)
MuleReazaXXX
已加入 在 May 2010
202 发布

Quelques questions embarrassantes

关于iStripper的一切
June 21, 2015, 9 回复
Bonjour,

Je me pose de plus en plus de questions à mesure que ma collection augmente...
Exemple:
1) Si VirtuaGirl met la clé sous la porte comment allons nous faire...
Personnellement je ne le souhaite pas du tout car ça me manquerait beaucoup de ne plus pouvoir discuter sur le forum avec mes ami(e)s, nos cher(e)s Team, Moderator, TripleDiamond...
et le pire serait de ne plus voir tous ces jolis petit culs :)
Ce que je sais sur le logiciel:
On peut actuellement installer VirtualGirl sur 2 ordinateurs (ça serait bien de pouvoir le mettre sur 3 ordinateurs voir plus...)
Le problème c'est que si demain le site ferme, il sera impossible de reconstruire la liste des modèles après réinstallation de Windows ou en cas de changement d'ordinateur...
La collection ne va pas pouvoir se reconstruire et du coup adieu les modèles et l'argent investit pour financer toutes ces beautés...
C'est pourquoi je me demande si par exemple:
Y-a-t'il possibilité d'acheter à VGHD un blu-ray avec nos modèles préférés pour pouvoir les réinstaller sans avoir recours au site internet ?
C'est vrai qu'il y a possibilité de faire un Ghost (Sauvegarde, Backup) de son ordinateur mais cela nécessite pas mal de connaissances et de place sur le disque dur donc c'est une solution qui n'est pas forcément à la portée de tout le monde...
  • Y-a-t'il une solution simple pour garder sa collection de VGHD dans cette situation ?

2) A présent, un exemple un peu triste.
Envisageons qu'une personne comme moi possédant une collection assez importante vienne à disparaitre de notre beau monde (nous ne sommes malheureusement pas à l'abri...)
Ce que je sais sur le logiciel:
D'après les conditions d'utilisation, j'ai le droit d'utiliser le logiciel sur deux ordinateurs différents pour moi et rien que pour moi, même si ma copine en profite quelques fois :)
Mais si je venais à disparaitre en emportant avec moi mon compte et tout mes modèles...
La collection non transmise va être perdue et ne sera donc plus utilisée et du coup adieu les modèles et l'argent investit pour financer toutes ces beautés...
C'est pourquoi je me demande si par exemple:
Est-ce que j'ai la possibilité de transmettre mon compte à mon enfant ou un membre de ma famille ? Faut-il le signaler à VGHD ?
  • Y-a-t'il une solution simple pour la succession de son compte et sa collection VGHD dans cette situation ?

Merci d'avance.
EverthangForever
已加入 在 Oct 2009
4468 发布

swing clips in fullscreen backgrounds 2D

关于iStripper的一切
June 21, 2015, 14 回复
@Scytha..'Is it because the clips uses different coordinates to set where on the screen they should appear? '

Yes thats right !!

If you look in the scene file in your /data/scenes folder with notepad, you will see an entry in the xxx.scn script near the top, something like this:

clip {
id: Clip 3
allow: top
}
that means 'top' or swing is uniquely positioned compared to other models.
The vertical positions of swing, pole,taskbar etc. clips are all relative to how the scene graphics are laid out of course so its hard to know what your settings will be without looking at the whole xxxx.scn script.

'top' means swing, and only swing is allowed there.
the position is shown for example below as a y value of -1070 near the bottom of the script, looking something like this:

clipSprite {
  • pos: -750, -1070, 20
source: Clip3
standingHeight: 550
resolution: 20
material: true
}
ie: position pos: x, y, z
x being horizontal, y being vertical, (& if it was a 3D camera ) z being depth in pixels.
minus values are left, up, in
positive values are right, down, out
These * are the values to change the position of your model. In your case try a more negative y value
to bring the swing up. To see your changes you need to resave the file & look again on fullscreen. You can keep notepad and VG player open all the time. Just keep editing and resaving until you get it right. when you are happy with the result resave to a new name suffix. That way you will never overwrite your custom changes.

There is a tutorial based on Paris Penthouse Club SCN you can use to help you at:
scenes.virtuastripper.net/GlossaryPPCSS.rtf
also
Tutorials http://http://www.virtuagirl.com/forumPost.php?&foId=8&ftId=27410&pageNb=4(basic Scene construction tutorials)